The surface has wear present especially on walls and top of waterfall step. Est. on the last 25% of its life cycle. No major issues seen at this time.

On the south section of the pool, there is one concrete stone that has settled and lifted, and will likely need attention ($400+).

On the water line rock work I am seeing a few loose rocks and the waterfall is not 100% waterproof and will likely need new mortar soon ($1000+).

Waterline tile appears to all be in normal condition.

There is light algae, found on the corners and steps and walls, which will likely require phosphate, treatment sand filter, cleanings ($210) to eliminate.

The bottom covers are due to be updated for safety ($88x2) + 1 equalizer line smaller ($50).

The skimmer is due to have its float / float onring / weir door / basket updated ($200)

There are two bottom cleaners here, one currently not being used the other in the pool.

Working but due for minor service / repair ($125-250)
Currently leaking.

A new light can incandescent is approx $565+ install ($650) if this light is no longer functioning.

The psi is 11 at 3000 RPMs. The filter is leaking from its tank o ring, and union O-rings, the filter is in poor / damaged condition. Recommend service ($150) to also confirm if filter elements are due for replacement ($400) and o ring set ($150). Note that due to age and condition it may be wiser to consider using any repair costs other than standard maintenance to replace this filter all together ($750+).

The pump is in working condition. No issues seen.

The timers and breakers are functioning but we are due to have the breakers updated to GFCI ($400).

No major leaks or issues. Recommend painting and labeling the equipment pad + cover from uv ($200).