The surface of the pool is a pebble type plaster. It is in fair condition. The surface does appear to likely be worn in some locations where black algae is currently growing inside of, it would be my recommendation to proceed with treatments that target the black algae as it is currently 10 to 50% of the pool.

The tile is in Ideal Condition without issue. There is black algae build up present in between some of the tiles that can be removed with treatment $10.

There is significant black algae president, especially found in the shaded areas. Recommend treatment to resolve between 375 and up.

There are two main drain covers in the pool - they are the larger 10 inch covers. They should be updated for safety if desired ($100x2).

The skimmer has some gashes presents, especially at the bottom likely due to construction. Also, the skimmer itself is at an angle approximately 10°. There are all require parts present however, the float O-ring will need to be updated ($100).

The bottom cleaners in working condition without issue at this time with an in-line leaf basket Hayward.

Recommend, adding the house, swivels for the suction side cleaner to help cause kinks to become free ($105).

There appears to have been a manual fill line added to the pool but it may be capped off at this time. Unsure of reason. Recommend re connection - $125+.

The pool light is working at this time. It has a color
Cycle function that it is currenlty running through. By turning on and off the light quickly you can change its function. There is algae present on the outside of the light lens recommend cleaning on the light and around the light and inside the can ($150).

This is a diatomaceous earth filter. It does appear to be fairly old. It is leaking from its tank O-ring in the pressure gauge assembly likely will need to be serviced recommend service ($250+) as well as likely service to the filter elements itself ($150) soon. Note I would not recommend any service and switching over to Sand ($750+).

This pump is in Ideal like new working condition.

Ideal working condition.

It does not appear that this system is working.

Recommend a new salt cell ($950+) as well as possibly a power center may be required on the new cell ($750).

Equipment pad is due to be updated with a new in line salt cell dummy cell $50 + new updated Valving backwash $550 + painting and labeling pad $300.