The Pool surface appears to be newer. I would estimate it between 12 and up to 72 months old.

Overall, I am not seeing any blemishes on the pools surface other than some common mottling, some black algae president, especially on the deep end walls and tile sections.

The surface in the shallow end, I am seeing some white flaking, and or some extra wear, in between the tiles, especially on the shallow and steps on the west side.

Do you water quality is indicating that the sign Eragas of levels are slightly low recommend re-checking this in the next 1 to 30 days to confirm waterloss presence.

Also note that since we have black algae, Present Recommend treating with an aggressive action ($375+).

Recommend updating the skimmer float, O-ring, and possibly a new Skimmer float as well ($50).

The bottom cleaner is in near new working condition. While it may not need the parts now it will need a new tire set in 6-12 months. Otherwise recommend simply Acid bathing this cleaner to eliminate organic matter like black algae build up.

The auto fill is in working condition without issue at this time.

There are two pool lights installed. Both are in working condition at this time.

The filter pressure is at six psi when the filter pump is at 2200 RPMs. Overall, this is normal pressure. However, I would recommend cleaning the filter heavily wants the black algae treatment is ongoing.

Note that it may be wise to consider a new filter element set once the black algae is nearly eliminated ($200-400+).

This Jandy variable speed pump is in working condition. I do not see any leaks or issues present with his pump at this time. Note that this pump does not enjoy being in direct sunlight for a prolonged periods of time, therefore recommend covering from UV ASAP.

The bottom Cleaner booster pump is in working condition without any leaks present.

The variable speed pump is not connected to a variable speed breaker recommend updating ($250).

The salt system cannot be fully tested due to water temperature being too low. Still, I would recommend removing the salt cell and installing the dummy cell ($150) to help prolong the life of this salt cell. If the salt cell were to expire, which is set to expire every 4 to 7 years of use expected cost of approximately $900.

Plumbing Installed is all in Ideal working condition without any leaks being present. The actuator functions well, as well as all valving present. I would only make one recommendation, and that is to install a check valve on the waterfalls, if desired as currently when the waterfall shut off, it does make a gurgling sound in this can be improved again, if desired ($300).

Otherwise I would recommend covering this equipment pad from UV exposure. $50.