Some wear and stains present in the deep end. Otherwise normal issues for its age.

On the north and south sides of the pool there are sections of lifting concrete from coping causing a trip hazard. Recommend grinding or concrete jacking to resolve. Approx $1500+ to resolve these issues.

On the rock sections of the pool and the tile to rock transitions we are seeing areas of missing or cracking surface that allows water proofing to occur $1500-$3500 to re mortar and re waterproof these areas of issue seen.

Optional: Also note that at this time of service to items above it would be a good time to update the skimmer and or main drain line independent from skimmer ($3k).

The levels are ideal. Slightly high on ph and alkalinity but normal overall. Note there is algae present especially on the bottom and some sides of the pool, this will need treatments to eliminate ($300-400) which will include phosphate treatments + enzyme + filter cleanings x2+

The main drain cover itself is approx $65 to install and cover expect a cost of $200. Note that due to age and condition the cover is due to be updated.

The return eyelets into the pool could be updated to variable speed returns to help improve overall flow and function of the pool ($25x4/5).

The bottom cleaner present is the black Polaris two 8380 the tail is not receiving a lot of water, and the tires are barely moving. It is likely that the unit has been modified to un allow detail to move but either way he will need a new tail in Likely new tires soon and adding two additional hose swivels and possibly a new wall adapter ($105+).

Timer Fill, connected to timer at wall of equipment pad. Not float style.

Light is not working / powering on at this time and may need replacement ($750+)

Recommend filter cleaning due to low flow seen during normal operation. Recommend service to the filter ($85-150).

This pump is in normal working condition. Without issue.

Working without issue. Note that the pump can be hard plumbed ($500) for increased overall efficiency / avoid leaks in future.

The variable speed pump should have a dedicated variable speed breaker ($200) and the pool light GFI should be updated as well for safety ($45+).

The salt system is not powering on (unplugged) the salt cell itself is likely older in age since there is no date stamp present - therefore due to age and condition It is likely that the salt cell will require replacement ($950).

The pool equipment pad has a cover over it, helping it avoid sun exposure. Also, the equipment Plumbing has had blue glue used and should be updated in the sections. These are described below.