The pool surface does have wear markings present throughout approximately 20-50% of the surface. It appears that it is uniformed in the fact that it is everywhere.

Tile does have a thick layer of calcium present that may be able to be removed by hand with an ice scraper, but most likely will need to be removed with a glass bead blasting service $750. On the rock work inside of the pool water line, it may require some new mortar being laid in between due to age and condition $500.

The water levels indicate that a leak may be present with slightly lower cyanuric acid levels and calcium hardness levels, recommend re-checking in 10 to 30 days to confirm results.

Water balance to bring. This chemistry to Ideal would be approximately $150.

There are two main drain covers install. Both are in Ideal working condition. Note that if older than seven years should be updated for safety $100 times two equals $200.

The Skimmer has some missing parts which will be the skimmer float O-ring and Recommend and Updating. The Skimmer float $100.

Note that there is Epoxy present inside the skimmer that may be here due to Leak Detection or leak repair work that was performed.

Bottom Cleaner has been ported on 100% which is not ideal for longevity on the unit. The unit likely will need new tires a new tail and tail sponge soon as well as a minor trimming to the hose $205

The auto fill is running continuously. Generally indicating a leak may be present recommend servicing this auto fill unit to confirm issue ($125+).

The pool light does not turn on and operate at this time it does appear to be filled with water recommend replacement for safety with a like model LED lights $1500

The filter is free of any leaks at this time but he’s due for service to the filter $150

The filter pump is in Ideal working condition without issue at this time. Recommend minor service to pump Lid o ring ($50).

The board and timer, or an ideal working condition with a GFCI to the variable speed, pool pump, and a GFCI for the pool light. Recommend updating the GFCI on the pool light when replacing the pool light for safety $150+

Equipment pad is likely due for service and maintenance, which will include replacing the to check valves for the solar and updating the O-rings for all the three-way valve times four ($1250) this will include painting and relabeling the equipment pad.