Home owner provided access to the backyard after opening a locked gate.

The age of the surface appears to be over 15 years old.

Some dust / markings / present throughout the surface. Found mostly in one section of shallow end middle, some steps, and a medium sized section area of material in deep end.

There is also rust circles found in south shallow end, steps, and some in deep end.

The waterline tile is mostly used for decoration. There are some tiles missing / present that likely will need new mortar in between to ensure they do not fall off (if this is the issue, some algae presence may be giving the illusion that it is missing grout). There are approximately 25+ or more tiles that are in this condition. If it is an issue this fixed expect a cost of approx $750+.

There are also tiles in laid into the surface, mostly found on the steps. These are showing signs of wear, and likely will need to be re-applied, and or repaired ($750+).

The connection between the skimmer, and the service is showing a gap present. This may not affect the waterproofing of this surface as it is likely that the skimmer is overlaid on top of the shell therefore likely cosmetic only, still should be addressed ($300).

There is algae present mostly seen between the tiles. This should be corrected via water treatments ($250+).

I am seeing water loss on the equipment pads coming out of the filter.

The skimmer inside has a leak repair performed to it. This appears to be more than one to five years old. If redone temporarily - expect a cost of $450. If corrected, correctly expect a cost of $2500+.

There is no main drain present.

The bottom cleaner does not appear to be operational at this time, likely due to the tracks present in compromise. This can be updated For approx $205. But a better choice is “the pool cleaner 4 wheel” ($450) + in line leaf basket ($100) is a far superior option.

I am unable to locate an automatic fill present, it appears it is done manually.

The seller confirmed that the pool light is no longer operational, and therefore should be updated for safety and longevity. Ranging approx $850+ for a new top tier quality color LED light.

This particular filter is known for having issues with its tank band. It is currently leaking from its tank O-ring in likely will need a new tank, O-ring, and order a new band ($400). There’s also potentially likely that the elements inside of the filter are due for replacement if it hasn’t been done in the last 2 to 5 years ($450).

The filter pump is older than 10 years but it is in working condition that has a newer motor on it that is working without issue at this time.

The pool light appears to be connected to a GFI breaker, but due to issues it would be recommended to update this breaker for safety ($125+).

The salt system appears to no longer be operational at this time. If that is the case, recommend updating the salt control unit and salt cell ($1750+). Or use UV + Ozone (Del AOP 25) for a MUCH better sanitation option.

The Valving present is all in working condition, without leaks at this time.

The seller informed me that the solar on the roof has a few minor leaks, and therefore was not tested at the time of inspection but rest assured that a water solar array on a roof is typically $150+ per panel to update & repair and junction parts is also $150+ per junction + labor.