Estimated age of surface 7-15 years.

There are calcium fishers present throughout the entire pool and spa walls, bottom, etc.

On the spa spill over I am noticing several areas of issue which include cracks on the corners of both sides of the spillover as well as foundational cracks throughout the center / rust present, it is likely that there is issues present and this section may require re-performance of foundation and restructuring ($2500+) to properly correct, hopefully it just needs to be re mortared with new water proof grout instead ($1000+).

Tile calcium present approx $550 to remove.

The water quality is in damaged condition, recommend modifications ($275+)

The main drains themselves are VGBA compliant, the covers likely are due to be updated due to age and condition ($100x5).

The skimmer is due to update its float, float o ring, and weighted basket ($300).

The bottom cleaner is in working condition however it is due to be updated and tuned up which will include a new tail tires and hose swivels ($205+).

Working condition, recommend minor adjustment as the fill is currently set just a hair too high to allow spillover to occur on the drain line in the skimmer ($10).

There is certainly water presence inside the light lens. Recommend replacment ($750+).

The spa light appears to likely have some water presence inside the outside lens area, if so recommend replacement ($750) for safety.

The filter is due to be serviced ($150) which is aimed to confirm if the elements inside the filter are due to be replaced ($500).

Working condition. Without issue.

Working condition. Without issue.

This pump is very high hp for the application and also too high for the size pipe. This is likely what is causing the pump basket to have significant air presence inside. Additionally the shut off valve and pump lid o ring likely will need replacement service ($450) to attempt to resolve. At that time consider tying the spa jet pump into the spa suction port (+$350) to allow VGBA compliance. As it stands now it is likely not.

This pump is working without issue, recommend minor lid o ring / suction union service ($100).

Damaged / Poor condition. Recommend replacement ($4900).

The timer and board could not be tested due to a locked panel.

The salt cell is no longer in functioning condition due to age, recommend replacement ($850+) regardless of the 3300 salt level present.

The Valving is in working condition, however due for service which will include opening and servicing all valves and replacing the low quality ball valves ($1250).