The surface is older than 25 years likely older than 30 and with wear markings down to the gunite as well as pits present it is recommended that the surface is replastered soon ($8-10k).

There are many sections of splitting on the bond beam on the top and middle portions of the tile it is likely that at least half of the pool tile will need to be repaired and replaced ($2500).

There is calcium present on many of the tiles above the waterline that can be removed if desired ($455+).

There is some mastic filled in between the coping in the concrete that is older and likely will need to be redone ($1000+).

Recommend balancing the cyanuric acid ($50).

Water loss was found specifically on the manual fill during use. The top of the filter (possibly). And also due to low cyanuric acid but not low calcium hardness (likely not water loss - recommend re checking to confirm in 1 -30 days).

The main drain cover in the pool is due to be updated recommend updating for safety ($88+).

The skimmer shows signs of heavy chlorine abuse / wear. The skimmer is due to have its float o ring, as well as weir door ($200).

The bottom cleaner unit is in working condition I would recommend upgrading the tires and adding an in-line leaf basket ($205).

The manual fill is leaking during use, recommend minor repair to resolve ($125+)

The pool light does turn on and operates but appears to be older. Except repalcment need in 1-96 months and a cost to update ($750+).

The filter is in working condition recommend cleaning and servicing the filter elements + repalcment pressure gauge ($205). At the time of service determine if the elements are due for replacement ($500+).

The filter pump is in ideal working condition.

The board is older with Rust Present. The breakers have been updated on the variable speed pump however not the full light recommend updating the pool light to GFCI ($150+).

The equipment pad is due to be painted labeled and covered from UV this will also include adding a check valve to the suction side and replacing the valve on the suction side plumbing as well ($750).