The water clarity has improved, What can be seen is a painted surface that appears to be less than a year old. It also appears to be in ideal condition overall. On the entry steps it does appear that there may be two drops of white paint which is unusual or it may be missing paint surface ($100). In the north shallow end there also appears to be a missing chunk of paint surface ($100). Also one or two more potential spots. Approx $500 total would likely resolve any touch ups to paint. Paint typically lasts between 1 to 3 years before re painting is required ($1500+).

The tile around the pool is older but showing little signs of issue. There is significant calcium build up present that likely can be removed for approximately $650

Some of the concrete around the pool is lifting and creating a potential trip hazard recommended attention ($?).

The water quality is poor with high alkalinity pH and chlorine, it is likely that the pump is not allowing circulation to occur and therefore water quality is suffering greatly. Recommend adjustments ASAP ($200). It also appears that the water is newer.

The main drain of the pool itself is not VGBA compliant but the cover itself is.

The inside of the skimmer throat is difficult to be seen as the water level is very high. The skimmer itself is heavily chlorine damaged. Recommend updating the float float O-ring and weir door ($300).

There is a robot cleaner present.

There is no auto fill present but there is a hose bib located next to the pool that likely can’t have an auto fill connected to it ($125+).

The pool light appears to be older and it is not turning on at this time therefore replacment is recommended - additionally it has been painted in place making it very difficult to remove for replacement recommend additional service on top of light replacement ($750+500).

The filter is like new. No issues.

The filter pump is in working condition. No leaks present. Ideal operation.

I cannot test the booster pump as it has its wiring disabled but it does appear to be newer and potentially working.

The panel is not permanently affixed to the ground it is balancing on its electrical connections which is highly dangerous especially for a metal box. This only had been out of pure that the cool pump is connected to the timer correctly and will need to be modified to allow timer function. As it stands right now the pool pump is only being ran off of the breaker. Also the equipment is not GFCI protected recommend updating to latest standards ($750+).

The piping is all like new and in ideal condition.