Expert Level Pool Inspections
Print Friendly Edit

2251 Wild Plains Cir, Rocklin, CA (3:00 PM - October 21, 2020)

Google Maps

Front Of House Pool Spa

Equipment Pad

Equipment #1 Equipment #2 Equipment #3 Equipment #4 Equipment #5

Safety Fencing Condition: Self Clocing Gate ERCV = $175.00 $0

Safety Fence #1 Safety Fence #2
Style Location
Wooden Side of home
Safety Fencing Notes
The access gate does not swing away from the pool, The fencing does not meet safety standards
Safety Fencing Additional Notes

OBSERVATION: The current gate does not meet the California Safety Barrier Code for swimming pool fencing, as the side gate is to swing outward and it swings inward. Additionally, although it is not required to bring existing pools up to code safety is a critical factor worth mentioning.

RECOMMENDATION: It is advised to implement two (2) of the following Drowning Prevention practices in order to become compliant with current code.

Pool Safety & Drowning Prevention:

As of 2018 California Building Code (CBC) for Swimming Pool Safety Barriers / Enclosures Per Health & Safety Code 115922(a), the swimming pool and/or spa shall be equipped with at least two of the following seven drowning prevention safety features. Please provide a second feature. Note that a fence along the property's perimeter is not listed.

1) an enclosure that meets the requirements of Section 115923 the swimming pool or spa from the private single-family home; and isolates

(2) removable mesh fencing that meets American Society for Testing and Materials (ASTM) Specifications F2286 standards in conjunction with a gate that is self-closing and self-latching and can accommodate a key lockable device;

(3) an approved safety pool cover, as defined in subdivision (d) of Section 115921;

(4) exit alarms on a private single-family home's doors that provide direct access to the swimming pool or spa (provided on drawings);

(5) a self-closing, self-latching device with a release mechanism placed no lower than 54" above the floor on the private single-family home's doors providing direct access to the swimming pool or spa;

(6) an alarm that, when placed in a swimming pool or spa, will sound upon detection of accidental or unauthorized entrance into the water. The alarm shall meet and be independently certified to the ASTM Standards F2208 "Standard Safety Specification of Residential Pool Alarms," which includes surface motion, pressure, sonar, laser, and infrared type alarms. A swimming protection alarm feature designed for individual use, including an alarm attached to a child that sounds when the child exceeds a certain distance or becomes submerged in water, is not a qualifying drowning prevention safety feature.

(7) other means of protection, if the degree of protection afforded is equal to or greater than that afforded by any of the features listed above and has been independently verified by an approved testing laboratory as meeting standards for those features established by the ASTM or the American society of Mechanical Engineers (ASME).

NOTE: THE CURRENT GATE AT THE FRONT / SIDE ENTRY DOES NOT MEET CURRENT CODE.
TWO DEVICES I.E.; "DROWNING PREVENTION SAFETY FEATURES" WERE NOT OBSERVED.

Pool Surface Condition: Poor $7500

Surface #1 Surface #2
Estimated Gallons Surface Type
15K - 20K Gallons Plaster
Dimensions Damaged Estimated Surface Age
14' by 36' 50-100% 1-12 Months
Pool Surface Notes
There are large areas of staining and discoloration, The pool surface has discoloration throughout due to improper water balance over time, The pool surface has heavy wear, pitting, and or missing surface areas, Recommend re-surface as soon as possible
Pool Surface Additional Notes

OBSERVATION: The interior plaster appeared to have areas of pitting and delamination. Plastering provides a "seal" over the Gunite. The core Gunite shell and steel reinforcements become exposed to the pool water when it migrates through the Gunite and this begin the process of decay and corrosion.

RECOMMENDATION: Secure services for a re-plastering job within the next twelve (12) months.

Cementitious surface coatings are susceptible to chemically and pH aggressive swimming pool water or to any chemical that is capable of deteriorating the cementitious materials of a surface coating.
Swimming pool water that is not in Ideal Range of acceptable tolerance (or “balanced”) as in accordance with the ANSI/APSP Standards is considered to be detrimental to cementitious surface coatings.
Depending on the direction of the imbalance a coating can either be stained or etched. Often, both staining and etching are exhibited on the surface of a coating as the pool water fluctuates from one extreme to the other.
There are visible signs of salt crystallization, surface efflorescence, or cracks that are emitting efflorescence or salt deposits which are common to a coating in contact with a positive saturation index (+ LSI), or “scaling” condition.
If the water is capable of leaching cement compounds from within the surface coating, then that water is in a negative saturation index (LSI), or "aggressive" condition.
If care is not taken to ensure that the water of a swimming pool is kept in an Ideal Range that is considered by ANSI/APSP to be balanced, and further that a sufficient amount of carbonate alkalinity buffer is constantly present, then the cementitious surface coating should be considered susceptible to damage from that water and deterioration may result.
Water-soluble salts, acids, or ions such as sulfates, chlorides, and carbonates, can be transported into a cementitious surface coating and react with the cementitious compounds. The resulting chemical reaction between the cementitious compounds and these salts, acids, or ions, in the presence of water, can cause deterioration to the coating. Acidic water aggressively attacks and dissolves cementitious surface materials.
Water that is low in hardness, or soft water, can cause leaching of certain compounds of the cement, especially calcium hydroxide.
For more information about the National Plastering Council's re-plastering recommendations please go to their website: https://www.npconline.org

Tile Condition: Poor$550

Tile #1 Tile #2
Water Line Tile Linear Footage Tile Water Level Tile Linear Footage
Less than 110 Linear Feet Low 110
Tile Type Calcium Build-Up Loose or missing tile?
Ceramic Medium Build Up ($550)
Mastic Repair
Additional Mastic Repairs

OBSERVATION Several areas were missing grout along the waterline tile.

RECOMMENDATION: Re-grouting should be done as soon as possible in order to maintain a water tight pool.

Additional Tile Notes

STATEMENT TILE REMODELING / REPLACEMENTS;

The adherence of tile or veneer products being applied during the re-tiling process of an existing swimming pool / spa and or water feature are subject to the status of the gunite shell's existing conditions. These conditions are unknown and outside the awareness of the current costs evaluations. Unknown conditions may exist that involve the effects of water saturation / penetration deterioration to the Bond Beam and or surfaces that are designated to have topical products reapplied. Repairs and remedy of such conditions are not part of any estimated costs assessments as they cannot be known until forensic investigation determines whether or not these will affect the re-applying process of the topical applications.
Therefore, until removal and discovery is performed of the existing underneath conditions, we cannot fully confirm that the intended work scope will not expand beyond the scope that’s been estimated. If this becomes a requirement an estimate will be submitted for approval prior to commencing with the additional repairs.

Water Quality Condition: Poor $125

Water Picture #1 Water Picture #2
pH Level Free Chlorine Total Chlorine Cyanuric Alkalinity Calcium
7.2 - 7.6 (Slightly High) 2 - 5 (Ideal) 5 - 10 (Slightly High) 50 - 100 (Ideal) 100 - 140 (High) 250 - 400 (Ideal)
pH Level Details Free Chlorine Details Total Chlorine Details Cyanuric Acid Details Alkalinity Notes Calcium Notes
Algae present? Foliage found in water? Water loss present?
Filter Cleaning and Filter Treatment 1 - 10 days after treatments would help reduce and eliminate algae and organic debris ($125) No
Additional Water Quality Notes

Skimmer & Main Drain Circulation: N/A $338

Drain #1 Drain #2 Skimmer #1 Skimmer #2
Water Flow Through Skimmer Water Flow Through Main Drain Skimmer Float Valve
N/A 1
Pool Skimmer QTY Spa Skimmer QTY Pool Main Drain QTY Spa Main Drain QTY
1 2 2
VGBA Compliant Drain Covers
No / Could Not Determine / Recommend VGBA Compliant Cover ($88)
Skimmer & Main Drain Details
The first skimmer is in great working condition with a like new working skimmer float weir and an in tact, in place, like new skimmer float valve and float valve seal present

Skimmer & Main Drain Additional Notes

Virginia Graeme Baker Pool and Spa Safety Act Information

On December 19, 2008 the Federal Virginia Graeme Baker Pool and Spa Safety Act (VGBA) became effective. The VGBA requires all pool drain covers manufactured or sold in the United States to comply with new entrapment standards. VGBA also requires owners of all new and existing public swimming pool and spa suction outlet systems to install safety equipment, including ASME/ANSI A112.19.8 certified suction outlets and covers, designed to prevent entrapment.

Currently the pool’s drain cover devices do not meet the safety requirements and should be replaced when the pool is replastered.

Bottom Cleaner Condition: Damaged, some major parts need to be replaced ($205) $205

Cleaner #1 Cleaner #2
Bottom Cleaner Brand Bottom Cleaner Model
Bottom Cleaner Additional Notes

OBSERVATION; The pool cleaner's booster pump appeared to be fairly new, although I was unable to activate the pump through the control panel.

The cleaner is a pressure side type and it appeared to be in need of servicing.

RECOMMENDATION: Locate the remote control device (which was requested but not found) and see if the pool cleaner pump is listed as a component. See if it can be activated via the remote control.

Bottom Cleaner Additional Repairs

Auto-Fill Condition: $0

Autofill #1 Autofill #2
Pool Auto-Fill Spa Auto-Fill Auto-Fill Style Fill Speed
Slow
Auto-Fill Additional Notes

COMMENT: The lid on the In-Deck Autofill was not the correct lid. It poses a tripping hazard and should be replaced. Additionally, the lid for the skimmer is also damaged and should be replaced.

RECOMMENDATION: These lids should be the poured in-place type in order to fit the existing Autofill and Skimmer manufacturer's canisters.

Pool Light Condition: $605

Pool Light #1 Pool Light #2
Pool Light Type Distance From Electrical
50' or less
Pool Light Notes

OBSERVATION: There is an existing GFCI Duplex Receptacle located under the Automation Control Panel. Generally, these are part of the pool lighting circuit. The pool and spa lights could not be activated and this Duplex Receptacle was tripped and would not reset. As a consequence the pool lights were not able to be turned on to be tested.

RECOMMENDATION: Secure the services of a licensed Electrician to investigate and remedy before using the pool.

NEC 680.23 Underwater Luminaires.
(A) General.

(2) Transformers. Transformers for underwater luminaires shall be an isolated winding type with a grounded metal barrier between the primary and secondary windings, and shall be listed for the purpose.
(3) GFCI Protection. Branch circuits supplying underwater luminaires that operate at more than 15V shall be GFCI protected. Figure 680-15 un680-15 680-23A3.cdr
(4) Voltage Limitation. Listed underwater luminaires shall not operate on circuits over 150V.
(5) Wall-Mounted Luminaires. Listed underwater luminaires shall be installed so that the top of the luminaire lens is at least 18 in. below the normal water level.
Author’s Comment: The 18 in. requirement is to reduce the likelihood that a person hanging over the side will have their chest cavity in line with the luminaire.

Spa Light Condition: $605

Spa Light #1 Spa Light #2
Spa Light Notes
Spa Light Additional Notes

OBSERVATION: There is an existing GFCI Duplex Receptacle located under the Automation Control Panel. Generally, these are part of the pool lighting circuit. The pool and spa lights could not be activated and this Duplex Receptacle was tripped and would not reset. As a consequence the pool lights were not able to be turned on to be tested.

RECOMMENDATION: Secure the services of a licensed Electrician to investigate and remedy before using the pool.

NEC 680.23 Underwater Luminaires.
(A) General.

(2) Transformers. Transformers for underwater luminaires shall be an isolated winding type with a grounded metal barrier between the primary and secondary windings, and shall be listed for the purpose.
(3) GFCI Protection. Branch circuits supplying underwater luminaires that operate at more than 15V shall be GFCI protected. Figure 680-15 un680-15 680-23A3.cdr
(4) Voltage Limitation. Listed underwater luminaires shall not operate on circuits over 150V.
(5) Wall-Mounted Luminaires. Listed underwater luminaires shall be installed so that the top of the luminaire lens is at least 18 in. below the normal water level.
Author’s Comment: The 18 in. requirement is to reduce the likelihood that a person hanging over the side will have their chest cavity in line with the luminaire.

Equipment Pad


Filter Condition: Fair (Normal to High Filter Pressure - Filter Cleaning Treatment Recommended $55) $

Filter #1 Filter #2
Filter Brand Filter Model
Hayward
Filter Notes
Filter Additional Notes

Filter Pump Condition: Good$

Filter Pump #1 Filter Pump #2
Filter Pump Brand Filter Pump Model Horsepower
Sta-Rite Variable Speed 1.5 - 3.1hp
Filter Pump Condition
Filter Pump Notes
Great, the filter pump is in great working condition; The motor is cool, the bonding wire is secured, the pump basket is free of chips and or cannot allow larger debris to bypass, the pump lid o-ring is secure with little to no air in the pump basket during operation.
Filter Pump Additional Notes

OBSERVATION: The pump appeared to be in working order through the controller.

Filter Pump Additional Repairs

Booster Pump Condition: $

Booster Pump #1 Booster Pump #2
Booster Pump Brand Booster Pump Model Horsepower
Booster Pump Additional Notes

OBSERVATION: The pump appeared to be in working order but, could not be activated at the controller.

RECOMMENDATION: Secure the services of a licensed Electrician to investigate and remedy before using the pool.

Spa Jet Pump Condition: Damaged (Needs Attention)$150

Spa Jet Pump #1 Spa Jet Pump #2
Spa Jet Brand Spa Jet Model Horsepower
Hayward
Spa Jet Additional Notes

OBSERVATION: The pump appeared to be in working order but, it had signs of water leakage.

RECOMMENDATION: Service all "O" rings and lubricate.


Waterfall Pump Condition: Damaged (Needs Attention)$150

Waterfall Pump #1 Waterfall Pump #2
Waterfall Pump Brand Waterfall Pump Model Horsepower
Hayward
Waterfall Pump Additional Notes

OBSERVATION: The pump appeared to be in working order but, it had signs of water leakage.

RECOMMENDATION: Service all "O" rings and lubricate.

Auxiliary Pump A Condition: Good$

Auxiliary Pump A #1 Auxiliary Pump A #2
Auxiliary Pump A Brand Auxiliary Pump A Model Horsepower
Auxiliary Pump A Additional Notes

Auxiliary Pump B Condition: N/A $

Auxiliary B #1 Auxiliary B #2
Auxiliary Pump B Brand Auxiliary Pump B Model Horsepower
Auxiliary Pump B Additional Notes

Heater Condition: Damaged (Needs Attention) $500

Heater #1 Heater #2
Heater Model Heater Brand
Heater Additional Notes

OBSERVATION: The Heater appears to be in newer condition but I could not get it to power up from the controller.

RECOMMENDATION: Secure the services of a licensed Electrician to investigate and remedy before using the pool.

Equipment Control System


Board & Timer Condition: Poor$

Board/Timer #1 Board/Timer #2
GFCI Compliant
No - Older GFI standard, tests, and resets the pool and or spa light. Recommend upgrading to GFCI standard for safety ($125)
Board & Timer Additional Notes

OBSERVATION: The Controller / Timer system appears to be the original equipment. This system is somewhat antiquated and does not activate all of the functions.

RECOMMENDATION: Retrofitting the Controller with an updated system will have a range in cost between; $1,500 to $3,500.

Auxiliary Timer Condition: N/A $1500

Auxiliary Timer #1 Auxiliary Timer #2
Auxiliary Timer Additional Notes

Salt Control Systems Condition: Damaged (Needs Attention)$1500

Salt Control #1 Salt Control #2
Salt System Power Detect Salt Flow Detect Salt Presence Low Salt
No No No
Salt Control System Additional Notes

OBSERVATION: The Controller / Timer system appears to be the original equipment. This system is somewhat antiquated and does not activate all of the Salt system's functions. The interior button panel is loose and not all of the display lights are displaying correctly. Some of this issues could be related to the GFCI circuit being tripped.

RECOMMENDATION: Retrofit a new sanitizer system. Options can include UV, Ozone, Etc. The costs for these system upgrades can range between; $1,500 to $2,500.

Valves & Fittings Condition: Poor$

Overall Details

OBSERVATIONS: The pool equipment pad's plumbing of the original painting, which is intended to protect the PVC piping from harmful UV rays has deteriorated and need to be repainted.

RECOMMENDATION: Service all valves and seals and repaint all PVC piping.


Due for maintenance, small equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment.
No, the equipment pad is not UV protected by a UV protectant paint, recommend painting this pad to ensure long PVC piping life as well as certain equipment, The equipment appears to be in direct sunlight a large portion of the day. By simply covering the equipment with a UV mesh shade ($25-55 on Amazon + Installation) you will see approx 3x equipment life and 3x less equipment breakdown. This is recommended here.
Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes

Estimated pool repair costs based on typical seasonal construction pricing.(seasonal pricing changes $13728Est. Totals


Edit
 

Comments are closed.



Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can
take care of it!

Pool Questions ? Call Us!

Do you need some swimming pool assistance? Maybe just a few questions answered ? Well give us a call, we are only a phone call away.

Sometimes you just need a second, qualified opinion.

Office: (916) 467-8038

Mobile: (916) 905-5818

Sacramento Pool Inspections & Service

We provide Weekly Pool & Spa Service, Pool Inspections, Pool Repairs, & Pool Tile Cleaning around the Sacramento Area, CA and the surrounding communities.

Swimming Pool Inspections & Service | (916) 905-5818