Expert Level Pool Inspections
Print Friendly Edit

6300 Edgewood Way, Rocklin,, CA (3:00 PM - December 16, 2019)

Google Maps

Front Of House Pool Spa

Equipment Pad

Equipment #1 Equipment #2 Equipment #3 Equipment #4 Equipment #5

Safety Fencing Condition: Poor $125

Safety Fence #1 Safety Fence #2
Style Location
Wooden, Mesh, . Side of home, Around pool
Safety Fencing Notes
Access was through home, The fencing does not meet safety standards
Safety Fencing Additional Notes

The pool has two type of safety barrier, which do not meet the current code requirements for the State of California i.e.: Pool Safety & Drowning Prevention: As of 2018 California Building Code (CBC) for Swimming Pool Safety Barriers / Enclosures Per Health & Safety Code 115922(a), the swimming pool and/or spa shall be equipped with at least two of the following seven drowning prevention safety features. Please provide a second feature. Note that a fence along the property's perimeter is not listed. 1) an enclosure that meets the requirements of Section 115923 the swimming pool or spa from the private single-family home; and isolates (2) removable mesh fencing that meets American Society for Testing and Materials (ASTM) Specifications F2286 standards in conjunction with a gate that is self-closing and self-latching and can accommodate a key lockable device; (3) an approved safety pool cover, as defined in subdivision (d) of Section 115921; (4) exit alarms on a private single-family home's doors that provide direct access to the swimming pool or spa (provided on drawings); (5) a self-closing, self-latching device with a release mechanism placed no lower than 54" above the floor on the private single-family home's doors providing direct access to the swimming pool or spa; (6) an alarm that, when placed in a swimming pool or spa, will sound upon detection of accidental or unauthorized entrance into the water. The alarm shall meet and be independently certified to the ASTM Standards F2208 "Standard Safety Specification of Residential Pool Alarms," which includes surface motion, pressure, sonar, laser, and infrared type alarms. A swimming protection alarm feature designed for individual use, including an alarm attached to a child that sounds when the child exceeds a certain distance or becomes submerged in water, is not a qualifying drowning prevention safety feature. (7) other means of protection, if the degree of protection afforded is equal to or greater than that afforded by any of the features listed above and has been independently verified by an approved testing laboratory as meeting standards for those features established by the ASTM or the American society of Mechanical Engineers (ASME)

Pool Surface Condition: Poor $7500

Surface #1 Surface #2
Estimated Gallons Surface Type
20K - 25K Gallons Plaster
Dimensions Damaged Estimated Surface Age
16' by 35' 0-10% 1-12 Months
Pool Surface Notes
There are large areas of staining and discoloration, The surface is slightly abrasive and not as smooth or as new and will allow more organic matter to grow as a result of the slightly abrasive surface
Pool Surface Additional Notes

Plaster and Chemical Attack:
Cementitious surface coatings are susceptible to chemically and pH aggressive swimming pool water or to any chemical that is capable of deteriorating the cementitious materials of a surface coating.
Swimming pool water that is not in Ideal Range of acceptable tolerance (or “balanced”) as in accordance with the ANSI/APSP Standards is considered to be detrimental to cementitious surface coatings.
Depending on the direction of the imbalance a coating can either be stained or etched. Often, both staining and etching are exhibited on the surface of a coating as the pool water fluctuates from one extreme to the other.
There are visible signs of salt crystallization, surface efflorescence, or cracks that are emitting efflorescence or salt deposits which are common to a coating in contact with a positive saturation index (+ LSI), or “scaling” condition.
If the water is capable of leaching cement compounds from within the surface coating, then that water is in a negative saturation index (LSI), or "aggressive" condition.
If care is not taken to ensure that the water of a swimming pool is kept in an Ideal Range that is considered by ANSI/APSP to be balanced, and further that a sufficient amount of carbonate alkalinity buffer is constantly present, then the cementitious surface coating should be considered susceptible to damage from that water and deterioration may result.
Water-soluble salts, acids, or ions such as sulfates, chlorides, and carbonates, can be transported into a cementitious surface coating and react with the cementitious compounds. The resulting chemical reaction between the cementitious compounds and these salts, acids, or ions, in the presence of water, can cause deterioration to the coating. Acidic water aggressively attacks and dissolves cementitious surface materials.
Water that is low in hardness, or soft water, can cause leaching of certain compounds of the cement, especially calcium hydroxide.
For more information about the National Plastering Council's re-plastering recommendations please go to their website: https://www.npconline.org

Tile Condition: Poor$0

Tile #1 Tile #2
Water Line Tile Linear Footage Tile Water Level Tile Linear Footage
Less than 110 Linear Feet High 105
Tile Type Calcium Build-Up Loose or missing tile?
Ceramic N/A or none No missing tiles or N/A
Mastic Repair
Additional Mastic Repairs

The tile and plaster are dated and showing signs of decay. There are a few repairs that appear to have previously filled in cracks. It was disclosed by the current Owner that they were cracks that had been loosing water and were repaired about 20 years ago when a leak was discovered. Due to the age (1967) of the pool that was shared by the Owner, if there are further concerns regarding these cracks, we recommend that these are investigated by a licensed Structural Engineer.

Additional Tile Notes

The cantilever pool edge is showing signs of decay and there is some exposed rusted rebar showing. In order to repair or replace the coping edge it would be more practical to engage the replacement of the entire pool deck or temporally patch the exposed safety risk where the rebar is exposed.

Decking replacement for demo, removal and replacement could range between +/- $8,500 to $10,500

Water Quality Condition: Good $

Water Picture #1 Water Picture #2
pH Level Free Chlorine Total Chlorine Cyanuric Alkalinity Calcium
7.2 - 7.6 (Slightly High) 2 - 5 (Ideal) 1 (Low) 50 - 100 (Ideal) 45 - 70 (Ideal) 250 - 400 (Ideal)
pH Level Details Free Chlorine Details Total Chlorine Details Cyanuric Acid Details Alkalinity Notes Calcium Notes
Algae present? Foliage found in water? Water loss present?
No
Additional Water Quality Notes

The pool water was quite high as a result of recent rains. If the pool coping edge / decking was replaced it would be our recommendation to install an 3.00" overflow line together with a new slotted drain system for the new decking.

Also, due to high water in the pool water can penetrate under the decking and cause lifting / settling issues. There are signs of cracking between the inlay stone on the decking.

Skimmer & Main Drain Circulation: Good $153

Drain #1 Drain #2 Skimmer #1 Skimmer #2
Water Flow Through Skimmer Water Flow Through Main Drain Skimmer Float Valve
Good 1
Pool Skimmer QTY Spa Skimmer QTY Pool Main Drain QTY Spa Main Drain QTY
1 N/A 1 N/A
VGBA Compliant Drain Covers
No / Could Not Determine / Recommend VGBA Compliant Cover ($88)
Skimmer & Main Drain Details
The first skimmer is in *working* condition however it is missing its skimmer *float valve o-ring* ($65)

Skimmer & Main Drain Additional Notes

Virginia Graeme Baker Pool and Spa Safety Act Information
On December 19, 2008 the Federal Virginia Graeme Baker Pool and Spa Safety Act (VGBA) became effective. The VGBA requires all pool drain covers manufactured or sold in the United States to comply with new entrapment standards. VGBA also requires owners of all new and existing public swimming pool and spa suction outlet systems to install safety equipment, including ASME/ANSI A112.19.8 certified suction outlets and covers, designed to prevent entrapment.
Currently the pool’s drain cover devices do not meet the safety requirements and should be replaced when the pool is replastered.

Bottom Cleaner Condition: $

Cleaner #1 Cleaner #2
Bottom Cleaner Brand Bottom Cleaner Model
Bottom Cleaner Additional Notes

The style of cleaner is a suction side cleaner and the hose was plugged into the suction of the surface skimmer, not a dedicated cleaner suction line. Also, the filtration pump acts as the cleaner pump when the cleaner is operational. When and if the decking is replaced then another line could be run in order to provide a valve activated separate cleaner suction line from the pump making it's operation more easily performed.

Bottom Cleaner Additional Repairs

Auto-Fill Condition: $550

Autofill #1 Autofill #2
Pool Auto-Fill Spa Auto-Fill Auto-Fill Style Fill Speed
No Manual Slow
Auto-Fill Additional Notes

The pool did not have an autofill / overflow. A small pump was placed on the top entry step and was being used to pump pool water out to a hose that was connected.

Pool Light Condition: Good$55

Pool Light #1 Pool Light #2
Pool Light Type Distance From Electrical
Incandescent Bulb 50' or less
Pool Light Notes
Light is in fair condition and I would expect this light to last another 1-5 years, recommend cleaning light fixture ($55)

Spa Light Condition: $

Spa Light #1 Spa Light #2
Spa Light Notes
Spa Light Additional Notes

Equipment Pad


Filter Condition: $

Filter #1 Filter #2
Filter Brand Filter Model
Pentair
Filter Notes
Low Filter Pressure - Indicating Low Flow or Newly Installed Filter Element
Filter Additional Notes

Filter Pump Condition: Good$

Filter Pump #1 Filter Pump #2
Filter Pump Brand Filter Pump Model Horsepower
1.00HP - 1.25HP
Filter Pump Condition
Filter Pump Notes
Filter Pump Additional Notes

There were puddles of water under the pool pump and the filter. Due to recent rains it could not be determined whether or not the water source was from rain or a leaking seal.

Filter Pump Additional Repairs

Booster Pump Condition: $

Booster Pump #1 Booster Pump #2
Booster Pump Brand Booster Pump Model Horsepower
Booster Pump Additional Notes

Spa Jet Pump Condition: N/A$

Spa Jet Pump #1 Spa Jet Pump #2
Spa Jet Brand Spa Jet Model Horsepower
Spa Jet Additional Notes

Waterfall Pump Condition: N/A$

Waterfall Pump #1 Waterfall Pump #2
Waterfall Pump Brand Waterfall Pump Model Horsepower
Waterfall Pump Additional Notes

Auxiliary Pump A Condition: N/A$

Auxiliary Pump A #1 Auxiliary Pump A #2
Auxiliary Pump A Brand Auxiliary Pump A Model Horsepower
Auxiliary Pump A Additional Notes

Auxiliary Pump B Condition: N/A $

Auxiliary B #1 Auxiliary B #2
Auxiliary Pump B Brand Auxiliary Pump B Model Horsepower
Auxiliary Pump B Additional Notes

Heater Condition: N/A $

Heater #1 Heater #2
Heater Model Heater Brand
Heater Additional Notes

Equipment Control System


Board & Timer Condition: Fair$

Board/Timer #1 Board/Timer #2
GFCI Compliant
Yes - The plug and or breaker are connected to the pool light and test and reset.
Board & Timer Additional Notes

Auxiliary Timer Condition: Poor $

Auxiliary Timer #1 Auxiliary Timer #2
Auxiliary Timer Additional Notes

There is a stub-out for solar but, it is not connected to a roof system.

Salt Control Systems Condition: N/A$

Salt Control #1 Salt Control #2
Salt System Power Detect Salt Flow Detect Salt Presence Low Salt
Salt Control System Additional Notes

Valves & Fittings Condition: N/A$

Overall Details


Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes
Condition
N/A
Notes

Estimated pool repair costs based on typical seasonal construction pricing.(seasonal pricing changes $8328Est. Totals


Edit
 

Comments are closed.



Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can
take care of it!

Pool Questions ? Call Us!

Do you need some swimming pool assistance? Maybe just a few questions answered ? Well give us a call, we are only a phone call away.

Sometimes you just need a second, qualified opinion.

Office: (916) 467-8038

Mobile: (916) 905-5818

Sacramento Pool Inspections & Service

We provide Weekly Pool & Spa Service, Pool Inspections, Pool Repairs, & Pool Tile Cleaning around the Sacramento Area, CA and the surrounding communities.

Swimming Pool Inspections & Service | (916) 905-5818