Expert Level Pool Inspections
Print Friendly Edit

2143 Outrigger Dr., El Dorado Hills, Ca (2:00 PM - November 21, 2019)

Google Maps

Front Of House Pool Spa

Equipment Pad

Equipment #1 Equipment #2 Equipment #3 Equipment #4 Equipment #5

Safety Fencing Condition: N/A $125

Safety Fence #1 Safety Fence #2
Style Location
Around pool
Safety Fencing Notes
Safety Fencing Additional Notes

There is no actual fencing installed for "safety" at this pool, no door alarms, and no safety barriers. Recommend installing 2 forms of safety devices.

Pool Surface Condition: Good $

Surface #1 Surface #2
Estimated Gallons Surface Type
10K - 15K Gallons Plaster
Dimensions Damaged Estimated Surface Age
12' by 20' 0-10% 7-15 Years
Pool Surface Notes
The pool surface appears to have no pitting or any loose surfaces present, The surface is slightly abrasive and not as smooth or as new and will allow more organic matter to grow as a result of the slightly abrasive surface
Pool Surface Additional Notes

The surface overall is in fair condition. Approx age of plaster is 1 - 7 years old. Plaster typically lasts 15-25 years before re-plaster is necessary. This is typically accelerated due to salt conditions as present in this pool.

There is a linear line present under the bench seating / counter top. This may be an indicator to plaster de lamination.

On the outside of the pool walls, inside the pool equipment pad, and inside the recessed bar area is water presence, calcium remains, and cracks present indicating water loss may be present, not only all of this but the calcium hardness levels are very low, which is the final indicator of water loss present.

Tile Condition: Damaged (Needs Attention)$0

Tile #1 Tile #2
Water Line Tile Linear Footage Tile Water Level Tile Linear Footage
200 Ideal 200
Tile Type Calcium Build-Up Loose or missing tile?
Ceramic N/A or none No missing tiles or N/A
Mastic Repair
None
Additional Mastic Repairs
Additional Tile Notes

The tile spillover from the spa to the pool has an unusual calcium / putty presence pictured. Both indicate some type of temporary repair. The main reason for this is the improper floating of the bond beam. This will require re-repair to be performed as this is not a long term solution. Recommend receiving a repair quote to re tile this main pool area as well as the rear water feature at the same time for maximum value ($ additional estimate needed).

Water Quality Condition: Damaged (Needs Attention) $440

Water Picture #1 Water Picture #2
pH Level Free Chlorine Total Chlorine Cyanuric Alkalinity Calcium
<6.5 20 + (Extremely High, Do Not Swim) 20 + (Extremely High, Do Not Swim) 50 - 100 (Ideal) 100 - 140 (High) 0 - 100 (Very Low)
pH Level Details Free Chlorine Details Total Chlorine Details Cyanuric Acid Details Alkalinity Notes Calcium Notes
Algae present? Foliage found in water? Water loss present?
355 Yes - Recommend Phosphate Treatment Yes
Additional Water Quality Notes

The chlorine levels are VERY high, which means the pool should not be used until it is lowered. The main reason the chlorine is so high may be because there is black algae present found most notably at the tile line entering the swimming pool. Approx cost to treat the algae is $355+ over the course of 3-9 weeks.

Also note the ph is low and the alkalinity is high indicating improper balance effort.

The cyanuric is ideal however the calcium hardness is low, indicating water loss may be present.

Skimmer & Main Drain Circulation: N/A $176

Drain #1 Drain #2 Skimmer #1 Skimmer #2
Water Flow Through Skimmer Water Flow Through Main Drain Skimmer Float Valve
N/A N/A
Pool Skimmer QTY Spa Skimmer QTY Pool Main Drain QTY Spa Main Drain QTY
N/A N/A 1 N/A
VGBA Compliant Drain Covers
No / 2x Could Not Determine / Recommend VGBA Compliant Cover ($176)
Skimmer & Main Drain Details


Skimmer & Main Drain Additional Notes

There is no skimmer installed, instead the spillover is considered a skimmer.

There are more than 10 safety covers installed for the sheer decent and the filter pump. These should be updated every 7 years ($88 x 10).

There is one suction port for the in floor cleaning system in the top pool and one in the lower basin.

Bottom Cleaner Condition: Damaged, unit is in distressed shape and will need more than $250 in repair items currently, consider replacement options ($405-655+). $650

Cleaner #1 Cleaner #2
Bottom Cleaner Brand Bottom Cleaner Model
Bottom Cleaner Additional Notes

The in floor cleaning system is not working at this time. No pop up jets function / suction is minimal / and a childs' sock was found in the clean out canister. Recommend service ($205) and parts may be required for repair ($450+/-).

Bottom Cleaner Additional Repairs

Auto-Fill Condition: Good ($10)$

Autofill #1 Autofill #2
Pool Auto-Fill Spa Auto-Fill Auto-Fill Style Fill Speed
Yes No Float Slow
Auto-Fill Additional Notes

The float is in working condition at this time. Found in the lowest basin.

Pool Light Condition: Good$

Pool Light #1 Pool Light #2
Pool Light Type Distance From Electrical
Halogen 100'
Pool Light Notes
Light is like new, with no water inside the lens and I would expect this light to last another 5-15 years

The pool lights installed are all in working condition. The step light is showing some signs of issue, and may expire soon (1-96 months -$605+). There are lights in the lowest basin and one of the lights appears to have condensation present in one of those lights indicating it will expire soon (1-24 months - $605).

Spa Light Condition: $

Spa Light #1 Spa Light #2
Spa Light Notes
Spa Light Additional Notes

The spa light is in working condition however the light is showing some signs of issue, and may expire soon (1-96 months -$605+).

Equipment Pad


Filter Condition: Damaged $230

Filter #1 Filter #2
Filter Brand Filter Model
Jandy CV 460
Filter Notes
Filter Additional Notes

The filter is in working condition, however the pressure gauge appears to no longer be in functioning condition ($105) and will need replacement, also the filter elements will need service / cleaning ($125) to confirm condition and if new elements are needed, which after the black algae is treated should be removed and replaced to assist with algae removal ($455).

Filter Pump Condition: Damaged$

Filter Pump #1 Filter Pump #2
Filter Pump Brand Filter Pump Model Horsepower
Jandy Stealth Big Body - 2.60HP! ≥ 2.50HP
Filter Pump Condition
The bonding wire is connected and secure
Filter Pump Notes
Filter Pump Additional Notes

The filter pump is in working condition. The motor is very hot during operation 4/4 and will cause the pump motor to expire soon ($555+). This would be a great candidate for a variable speed pump (IntelliPRO $1675) instead as this pump is a VERY high energy consumer. The reason behind the hot motor may be dirty filter elements, this was detailed in the filter section, and should be investigated further to determine pump motor repair.

Filter Pump Additional Repairs

Booster Pump Condition: Good Condition$

Booster Pump #1 Booster Pump #2
Booster Pump Brand Booster Pump Model Horsepower
Jandy Stealth Large Body - 2.60 HP! ≥ 2.50HP
Booster Pump Additional Notes

This pump is in ideal working condition.

Spa Jet Pump Condition: N/A$

Spa Jet Pump #1 Spa Jet Pump #2
Spa Jet Brand Spa Jet Model Horsepower
Spa Jet Additional Notes

Waterfall Pump Condition: Damaged (Needs Attention)$505

Waterfall Pump #1 Waterfall Pump #2
Waterfall Pump Brand Waterfall Pump Model Horsepower
Jandy Stealth Large Body - 2.60 HP! ≥ 2.50HP
Waterfall Pump Additional Notes

This pump is in working condition, however there appears to be a leak on the seal plate / shaft seal and will need repair to resolve ($505) this leak.

Auxiliary Pump A Condition: N/A$

Auxiliary Pump A #1 Auxiliary Pump A #2
Auxiliary Pump A Brand Auxiliary Pump A Model Horsepower
Auxiliary Pump A Additional Notes

Auxiliary Pump B Condition: N/A $

Auxiliary B #1 Auxiliary B #2
Auxiliary Pump B Brand Auxiliary Pump B Model Horsepower
Auxiliary Pump B Additional Notes

Heater Condition: Damaged (Needs Attention) $760

Heater #1 Heater #2
Heater Model Heater Brand
Jandy LXi
Heater Additional Notes

The heater appears to be in ideal working condition, however the gas has been disconnected and apparently pressure testing is occurring due to the pressure gauge being used. It appears there is sufficient gas to allow re connection and use of this heater ($255).

Also note that the expelling of heater vapor is in a poor location and can cause harm to those in the spa while the heater is in use. The vent should be positioned differently to avoid issue ($505).

Equipment Control System


Board & Timer Condition: Great$410

Board/Timer #1 Board/Timer #2
GFCI Compliant
Board & Timer Additional Notes

The timer is in working condition with GFCI light breaker installed. The panel and light junction box should have a bonding wire connected for safety ($205).

The breakers should also be GFCI or the main house breaker to the pool equipment should be GFCI protected ($205).

Auxiliary Timer Condition: N/A $

Auxiliary Timer #1 Auxiliary Timer #2
Auxiliary Timer Additional Notes

Salt Control Systems Condition: Damaged (Needs Attention)$705

Salt Control #1 Salt Control #2
Salt System Power Detect Salt Flow Detect Salt Presence Low Salt
Yes Yes No Yes
Salt Control System Additional Notes

The salt system is not being used at this time, most likely due to the low water temperatures. Recommend service to determine condition of the salt system when the pool water is above 65 degrees ($125).

Additionally the salt cell is in a location that will damage the heater / in floor cleaning system heads. I would install a check valve ($205) and find a different location to administer the salt back into the pool ($500+) to avoid deterioration to delicate metal and plastic fittings.

Valves & Fittings Condition: N/A$205

Overall Details


Condition
Poor
Notes

Showing the calcium bleed through present in the equipment room. Not only the obvious center but the upper left and right of this room.

Also the valving present in this room is all in working condition with no leaks present. There are some concerns on one check valve and two actuators ($775) but they are in working condition at this time, but will need service / repair soon.

Condition
Damaged (Needs Attention)
Notes

This is an unfinished waterfall, the concrete cinder blocks should be painted or textured with some type of material.

Condition
Damaged (Needs Attention)
Notes

There are cracks present on both waterfall surfaces. This is caused by long term settling occuring. I do like that it is one solid piece of material to avoid calcium bleed through on grout joints, and no doubt this slab of material is costly. Recommend repair before this heavy material crack all the way through and falls off and damages the lower basin areas.

Additionally the lowest basin of these waterfalls has been heavily discolored due to high levels of chlorine / low water levels and poor management. Consider re plastering /re surfacing this or installing river rock to hide the discoloration.

Also on the top of the waterfalls there is a mesh material used to limit organic matter from pooling in this, this needs to be repaired to ensure longer operation as intended.

All of this should be resolved through tile repair work.

Condition
Damaged (Needs Attention)
Notes

Calcium bleed through due to improper tile application initially.

Also note the bubbling occurring on the edges of the copper paneling, this is caused by the low ph / salt condition of the pool.

Condition
Damaged (Needs Attention)
Notes

There is a small leak on the return fitting of the main flow pump. Recommend repair ($205), at that time inspect the filter element next to this pump.


Estimated pool repair costs based on typical seasonal construction pricing.(seasonal pricing changes $4206Est. Totals


Edit
 

Comments are closed.



Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can
take care of it!

Pool Questions ? Call Us!

Do you need some swimming pool assistance? Maybe just a few questions answered ? Well give us a call, we are only a phone call away.

Sometimes you just need a second, qualified opinion.

Office: (916) 467-8038

Mobile: (916) 905-5818

Sacramento Pool Inspections & Service

We provide Weekly Pool & Spa Service, Pool Inspections, Pool Repairs, & Pool Tile Cleaning around the Sacramento Area, CA and the surrounding communities.

Swimming Pool Inspections & Service | (916) 905-5818