Expert Level Pool Inspections
Print Friendly Edit

2340 Ironwood Lane, Lincoln,, CA (11:00 AM - November 4, 2019)

Google Maps

Front Of House Pool Spa

Equipment Pad

Equipment #1 Equipment #2 Equipment #3 Equipment #4 Equipment #5

Safety Fencing Condition: Does not currently meet code $0

Safety Fence #1 Safety Fence #2
Style Location
Wooden, Mesh Side of home
Safety Fencing Notes
Access was through home, The fencing does not meet safety standards
Safety Fencing Additional Notes

Pool Safety & Drowning Prevention:
As of 2018 California Building Code (CBC) for Swimming Pool Safety Barriers / Enclosures Per Health & Safety Code 115922(a), the swimming pool and/or spa shall be equipped with at least two of the following seven drowning prevention safety features. Please provide a second feature. Note that a fence along the property's perimeter is not listed.
1) an enclosure that meets the requirements of Section 115923 the swimming pool or spa from the private single-family home; and isolates
(2) removable mesh fencing that meets American Society for Testing and Materials (ASTM) Specifications F2286 standards in conjunction with a gate that is self-closing and self-latching and can accommodate a key lockable device;
(3) an approved safety pool cover, as defined in subdivision (d) of Section 115921;
(4) exit alarms on a private single-family home's doors that provide direct access to the swimming pool or spa (provided on drawings);
(5) a self-closing, self-latching device with a release mechanism placed no lower than 54" above the floor on the private single-family home's doors providing direct access to the swimming pool or spa;
(6) an alarm that, when placed in a swimming pool or spa, will sound upon detection of accidental or unauthorized entrance into the water. The alarm shall meet and be independently certified to the ASTM Standards F2208 "Standard Safety Specification of Residential Pool Alarms," which includes surface motion, pressure, sonar, laser, and infrared type alarms. A swimming protection alarm feature designed for individual use, including an alarm attached to a child that sounds when the child exceeds a certain distance or becomes submerged in water, is not a qualifying drowning prevention safety feature.
(7) other means of protection, if the degree of protection afforded is equal to or greater than that afforded by any of the features listed above and has been independently verified by an approved testing laboratory as meeting standards for those features established by the ASTM or the American society of Mechanical Engineers (ASME).

NOTE: THE CURRENT GATE AT THE FRONT / SIDE ENTRY DOES NOT MEET CURRENT CODE.

TWO DEVICES I.E.; "DROWNING PREVENTION SAFETY FEATURES" WERE NOT OBSERVED.

Pool Surface Condition: Fair (1-72 Months) $6000

Surface #1 Surface #2
Estimated Gallons Surface Type
20K - 25K Gallons Plaster
Dimensions Damaged Estimated Surface Age
21' by 36' 10-50% 12-48 Months
Pool Surface Notes
There are some small areas of staining or discoloration, The pool surface has discoloration throughout due to improper water balance over time
Pool Surface Additional Notes

Plaster and Chemical Attack:

Cementitious surface coatings are susceptible to chemically and pH aggressive swimming pool water or to any chemical that is capable of deteriorating the cementitious materials of a surface coating.
Swimming pool water that is not in Ideal Range of acceptable tolerance (or “balanced”) as in accordance with the ANSI/APSP Standards is considered to be detrimental to cementitious surface coatings.
Depending on the direction of the imbalance a coating can either be stained or etched. Often, both staining and etching are exhibited on the surface of a coating as the pool water fluctuates from one extreme to the other.
There are visible signs of salt crystallization, surface efflorescence, or cracks that are emitting efflorescence or salt deposits which are common to a coating in contact with a positive saturation index (+ LSI), or “scaling” condition.
If the water is capable of leaching cement compounds from within the surface coating, then that water is in a negative saturation index (LSI), or "aggressive" condition.
If care is not taken to ensure that the water of a swimming pool is kept in an Ideal Range that is considered by ANSI/APSP to be balanced, and further that a sufficient amount of carbonate alkalinity buffer is constantly present, then the cementitious surface coating should be considered susceptible to damage from that water and deterioration may result.
Water-soluble salts, acids, or ions such as sulfates, chlorides, and carbonates, can be transported into a cementitious surface coating and react with the cementitious compounds. The resulting chemical reaction between the cementitious compounds and these salts, acids, or ions, in the presence of water, can cause deterioration to the coating. Acidic water aggressively attacks and dissolves cementitious surface materials.
Water that is low in hardness, or soft water, can cause leaching of certain compounds of the cement, especially calcium hydroxide.
For more information about the National Plastering Council's re-plastering recommendations please go to their website: https://www.npconline.org

Tile Condition: Good$705

Tile #1 Tile #2
Water Line Tile Linear Footage Tile Water Level Tile Linear Footage
Less than 150 Linear Feet Ideal
Tile Type Calcium Build-Up Loose or missing tile?
Ceramic Light Build Up ($450) Less than 5 Tiles ($255)
Mastic Repair
Additional Mastic Repairs
Additional Tile Notes

Water Quality Condition: Poor $550

Water Picture #1 Water Picture #2
pH Level Free Chlorine Total Chlorine Cyanuric Alkalinity Calcium
6.8 - 7.2 (Ideal) 5 - 10 (Slightly High) 5 - 10 (Slightly High) 0 - 20 (Very Low) 70 - 100 (Slightly High) 400 - 650 (Slightly High)
pH Level Details Free Chlorine Details Total Chlorine Details Cyanuric Acid Details Alkalinity Notes Calcium Notes
Algae present? Foliage found in water? Water loss present?
Filter Cleaning and Filter Treatment 1 - 10 days after treatments would help reduce and eliminate algae and organic debris ($125), A phosphate treatment ($85) will help reduce dissolved organics (100-1000ppb) by coagulating organics for 7-10 days allowing collection to occur on the filter. A filter cleaning is required after treatment., An enzyme treatment would reduce dissolved organics additionally through enzyme breakdown and oxidization ($65), An enzyme treatment would reduce dissolved organics additionally through enzyme breakdown and oxidization ($65), 0 Yes - Recommend Phosphate Treatment
Additional Water Quality Notes

Skimmer & Main Drain Circulation: Good $329

Drain #1 Drain #2 Skimmer #1 Skimmer #2
Water Flow Through Skimmer Water Flow Through Main Drain Skimmer Float Valve
Good 1
Pool Skimmer QTY Spa Skimmer QTY Pool Main Drain QTY Spa Main Drain QTY
1 N/A 1 1
VGBA Compliant Drain Covers
No / 3x Could Not Determine / Recommend VGBA Compliant Cover ($264)
Skimmer & Main Drain Details
The first skimmer is in *working* condition however it is missing its skimmer *float valve o-ring* ($65)

Skimmer & Main Drain Additional Notes

Virginia Graeme Baker Pool and Spa Safety Act Information
On December 19, 2008 the Federal Virginia Graeme Baker Pool and Spa Safety Act (VGBA) became effective. The VGBA requires all pool drain covers manufactured or sold in the United States to comply with new entrapment standards. VGBA also requires owners of all new and existing public swimming pool and spa suction outlet systems to install safety equipment, including ASME/ANSI A112.19.8 certified suction outlets and covers, designed to prevent entrapment.
Currently the pool’s drain cover devices do not meet the safety requirements and should be replaced when the pool is replastered.

Bottom Cleaner Condition: Poor $300

Cleaner #1 Cleaner #2
Bottom Cleaner Brand Bottom Cleaner Model
Polaris
Bottom Cleaner Additional Notes
Bottom Cleaner Additional Repairs

Auto-Fill Condition: $500

Autofill #1 Autofill #2
Pool Auto-Fill Spa Auto-Fill Auto-Fill Style Fill Speed
No Manual Medium
Auto-Fill Additional Notes

The current water filling of the pool is done by turning a manual valve. Adding a actual float activated auto-fill devise would run $400 to $600.

Pool Light Condition: Good$55

Pool Light #1 Pool Light #2
Pool Light Type Distance From Electrical
LED 50' or less
Pool Light Notes
Light is in fair condition and I would expect this light to last another 1-5 years, recommend cleaning light fixture ($55)

Spa Light Condition: Damaged (Water Present - Light Can Replacement $475)$475

Spa Light #1 Spa Light #2
Spa Light Notes
Water Present inside light lens.
Spa Light Additional Notes

Equipment Pad


Filter Condition: Fair (Normal to High Filter Pressure - Filter Cleaning Treatment Recommended $55) $

Filter #1 Filter #2
Filter Brand Filter Model
Sta-Rite
Filter Notes
Filter Additional Notes

Pressure gauge was not readable as the dial was fogged up obscuring the psi indicator.

Filter Pump Condition: Pump connection was leaking, pump was working.$750

Filter Pump #1 Filter Pump #2
Filter Pump Brand Filter Pump Model Horsepower
Sta-Rite Variable Speed 1.5 - 3.1hp
Filter Pump Condition
Water leaking from the return and/ or suction sides of pump connection(s)., The bonding wire is connected and secure
Filter Pump Notes
Filter Pump Additional Notes

The plumbing needs some attention as there are several small leaks.

Filter Pump Additional Repairs

Booster Pump Condition: Fair (Replacement recommended in 6 months - 5 years $455)$455

Booster Pump #1 Booster Pump #2
Booster Pump Brand Booster Pump Model Horsepower
Polaris ≤ 0.99HP
Booster Pump Additional Notes

The plumbing needs some attention as there are upgrades that can routine the booster pump's operation through a valve actuator making it part of a more sophisticated controllable functionality through automation.

Spa Jet Pump Condition: N/A$2750

Spa Jet Pump #1 Spa Jet Pump #2
Spa Jet Brand Spa Jet Model Horsepower
Spa Jet Additional Notes

The spa's function shares the same pump as the pool. Currently it operates by manually changing the positioning of the suction and return line valves. This could become automated by adding a more sophisticated automation control system and valve acturators.


Waterfall Pump Condition: N/A$

Waterfall Pump #1 Waterfall Pump #2
Waterfall Pump Brand Waterfall Pump Model Horsepower
Waterfall Pump Additional Notes

Auxiliary Pump A Condition: N/A$

Auxiliary Pump A #1 Auxiliary Pump A #2
Auxiliary Pump A Brand Auxiliary Pump A Model Horsepower
Auxiliary Pump A Additional Notes

Auxiliary Pump B Condition: N/A $

Auxiliary B #1 Auxiliary B #2
Auxiliary Pump B Brand Auxiliary Pump B Model Horsepower
Auxiliary Pump B Additional Notes

Heater Condition: Damaged (Needs Attention) $1850

Heater #1 Heater #2
Heater Model Heater Brand
Hayward
Heater Additional Notes

The Heater was not working. Replacement with a new one would be our recommendation rather than engaging a repair. This is due to the Heater's age. Also, a larger sized Heater (250K BTU) would provide for a better heating rate / gpm turnover and that would add $650.00 to the costs for the heater replacement.

Equipment Control System


Board & Timer Condition: Poor$2150

Board/Timer #1 Board/Timer #2
GFCI Compliant
GFI/GFCI/Light Breaker/Plug is not connected to any light, recommend service to repair and upgrade this issue for safety ($245)
Board & Timer Additional Notes

The Sub-Panel latch was screwed closed so it could not be opened. The Sun-Touch controller was operational but, with limited functionality. Our recommendation would be to replace this with an EasyTouch Controller that can interfaced with valve actuators and iPhone activation.

Auxiliary Timer Condition: Poor $

Auxiliary Timer #1 Auxiliary Timer #2
Auxiliary Timer Additional Notes

The solar system could not be tested as the valve had a broken handle disabling it from being turned to the "on" position. The solar grid that was located on the roof appeared to be leaking in the past but, this could not be visually confirmed.

Salt Control Systems Condition: N/A$

Salt Control #1 Salt Control #2
Salt System Power Detect Salt Flow Detect Salt Presence Low Salt
Salt Control System Additional Notes

Valves & Fittings Condition: Poor$

Overall Details

Pool Light Fixtures Require a GFCI Ground Fault Circuit

WARNING: If you have a pool light that is not protected by GFCI Ground Fault Circuit protection then the occupants in or around the swimming pool are at grave risk of potential electrical shock, this includes pets and other animals as well!

VERY IMPORTANT: PLEASE – Turn OFF the circuit to your swimming pool light or electrical outlets that are NOT GFCI Protected, call a Qualified Licensed Electrician and have the necessary Ground Fault Protection installed.

As described in this electrical question, anyone who enters the pool with this light on is in Danger of Potential Electrical Shock!

National Electrical Code: NEC Article 680-20 Pool Light Fixture

The National Electrical Code – Article 680-20a1 states that a pool light fixture over 15 volts must be GFCI Protected.
The very reason the original GFCI circuit breaker tripped indicates that there is something wrong with the circuit, and the GFCI circuit breaker was providing the protection against a potential electric shock.

The alleged “electrician” who removed this GFCI protection has placed himself in an extremely liable position.

This person should be notified and asked to come back and place the GFCI circuit breaker back on the circuit, then I would hire a Qualified Licensed Electrician who knows more about the electrical code.

I would also notify the pool company who uses this other person and inform them of their inadequacies and the liable position their actions are placing onto the referring pool company.

You have also stated that the 120 volt light is fed from a 220 volt pump circuit. If this is the case then this needs to be changed because a 220 volt pump circuit does not provide the necessary isolated neutral wire for the 120 volt light.
Low Voltage Lighting as a Safer Lighting Source
The advance in lighting technologies now provide several low voltage alternatives to be considered as a replacement light source.


Due for maintenance, small equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment.
The equipment appears to be in direct sunlight a large portion of the day. By simply covering the equipment with a UV mesh shade ($25-55 on Amazon + Installation) you will see approx 3x equipment life and 3x less equipment breakdown. This is recommended here.
Condition
Poor
Notes

Service valve and add valve actuator

Condition
Poor
Notes

Service valve and add valve actuator

Condition
N/A
Notes

The diving board shows signs of rusted bolts and plastic separation along the bottom. Also, the rate of rise on the pool floor could not be confirmed as meeting NSPI 3:1 ratio recommendations for the board length (8'-0"). Refer to S.R. Smith website for further safety guidelines for compliance before using this accessory.

Condition
N/A
Notes

All electrical equipment needs to be bonded to the pool by using a bare #8 copper wire per NEC. Currently the type of bonding wire is incorrect, per code.

Condition
N/A
Notes

Estimated pool repair costs based on typical seasonal construction pricing.(seasonal pricing changes $16814Est. Totals


Edit
 

Comments are closed.



Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can
take care of it!

Pool Questions ? Call Us!

Do you need some swimming pool assistance? Maybe just a few questions answered ? Well give us a call, we are only a phone call away.

Sometimes you just need a second, qualified opinion.

Office: (916) 467-8038

Mobile: (916) 905-5818

Sacramento Pool Inspections & Service

We provide Weekly Pool & Spa Service, Pool Inspections, Pool Repairs, & Pool Tile Cleaning around the Sacramento Area, CA and the surrounding communities.

Swimming Pool Inspections & Service | (916) 905-5818