Expert Level Pool Inspections
Print Friendly Edit

5730 Cowell Blvd, Davis, Ca (11:00 AM - July 10, 2019)

Google Maps

Front Of House Pool Spa

Equipment Pad

Equipment #1 Equipment #2 Equipment #3 Equipment #4 Equipment #5

Safety Fencing Condition: Fair - Needs minor adjustment to SC / SL $125

Safety Fence #1 Safety Fence #2
Style Location
Mesh Around pool
Safety Fencing Notes
The fencing needs minor repair to self close and self latch, The fencing does not meet safety standards
Safety Fencing Additional Notes

Pool Surface Condition: Damaged (Needs Attention) $

Surface #1 Surface #2
Estimated Gallons Surface Type
20K - 25K Gallons Plaster
Dimensions Damaged Estimated Surface Age
14' by 32' 0-10% 12-48 Months
Pool Surface Notes
The surface is uniform and smooth with little or no discoloration found
Pool Surface Additional Notes

The spa surface is in damaged condition. Pitting is present throughout.

The pool surface is in damaged condition; most notably in the middle section of the step, and a foundation crack is present going from the lower section of the step face to the top section of the step top (pictured #1). Recommend repair soon to resolve any water loss potential. For best value re plaster at time of foundation repair service.

Recommend considering re plastering the spa and crack of the pool first or upon re-plaster, recommend quote from plaster agent Alex Rodriguez.

Tile Condition: Damaged (Needs Attention)$805

Tile #1 Tile #2
Water Line Tile Linear Footage Tile Water Level Tile Linear Footage
Less than 150 Linear Feet N/A 145
Tile Type Calcium Build-Up Loose or missing tile?
Ceramic Medium Build Up ($550) Less than 5 Tiles ($255)
Mastic Repair
None
Additional Mastic Repairs
Additional Tile Notes

Damaged; The tile overall is in good condition. There are some sections of issue, specifically on the raised spa edge next to the pool. These areas are of concern over the next 1 - 5 years. To repair approx cost $300-500.

Recommended; The spa water line tile , and above has a water stop present but not mastic. Mastic is ideal, and stops water bleed through when the spa is in use. Some signs of water bleed through during use. Mastic repair of spa top of tile edge is approx $300-500.

The waterfall does not show signs of water bleed through, or water loss. Note that considerable foliage growth is present blocking much of the water bleed through points, however none present at time of inspection.

Damaged; There is calcium build up present ($550) and it can be removed to expose the like new tile present underneath.

Water Quality Condition: Good $210

Water Picture #1 Water Picture #2
pH Level Free Chlorine Total Chlorine Cyanuric Alkalinity Calcium
7.6 - 8.0 (High) 5 - 10 (Slightly High) 5 - 10 (Slightly High) 120 - 150 (High) 70 - 100 (Slightly High) 400 - 650 (Slightly High)
pH Level Details Free Chlorine Details Total Chlorine Details Cyanuric Acid Details Alkalinity Notes Calcium Notes
Algae present? Foliage found in water? Water loss present?
Filter Cleaning and Filter Treatment 1 - 10 days after treatments would help reduce and eliminate algae and organic debris ($125) Yes - Recommend Phosphate Treatment Yes
Additional Water Quality Notes

Skimmer & Main Drain Circulation: Fair Condition $633

Drain #1 Drain #2 Skimmer #1 Skimmer #2
Water Flow Through Skimmer Water Flow Through Main Drain Skimmer Float Valve
Fair Condition 1
Pool Skimmer QTY Spa Skimmer QTY Pool Main Drain QTY Spa Main Drain QTY
1 N/A 2 2
VGBA Compliant Drain Covers
528
Skimmer & Main Drain Details
The first skimmer is in *working* condition however it is missing its *float valve* ($50), The first skimmer is in *working* condition however it is missing its *skimmer weir* ($55)

Skimmer & Main Drain Additional Notes

Recommend upgrading the skimmer weir and float. The skimmer also has some chemical abuse present, this can lead to replacement need sooner than later if prolonged. Recommend not placing 3" tablets any further in the skimmer basket that weaken the skimmer plastics.

Also the main drain covers, all 8 of them should be updated as well.

Bottom Cleaner Condition: Fair, minimal parts needed for tune-up ($105) $105

Cleaner #1 Cleaner #2
Bottom Cleaner Brand Bottom Cleaner Model
Polaris Polaris 280
Bottom Cleaner Additional Notes

Recommend minor parts needs; tail, bag, swivels. This should bring the unit back to like new condition. Approx cost $105.

Bottom Cleaner Additional Repairs

Auto-Fill Condition: Good ($10)$10

Autofill #1 Autofill #2
Pool Auto-Fill Spa Auto-Fill Auto-Fill Style Fill Speed
Yes No Float Slow
Auto-Fill Additional Notes

The auto fill was running during the entire service visit, this may be caused by a leak present in the pool / or equipment. There are several leaks observed on the equipment pad. Note the fill canister should be cleaned out for proper use ($10).

Pool Light Condition: Good$

Pool Light #1 Pool Light #2
Pool Light Type Distance From Electrical
Incandescent Bulb 50' or less
Pool Light Notes
Light is like new, with no water inside the lens and I would expect this light to last another 5-15 years

There are two lights installed. Both are like new and in good condition.

Spa Light Condition: Good$0

Spa Light #1 Spa Light #2
Spa Light Notes
Light is like new and I would expect this light to last another 5-15 years (new bulb)
Spa Light Additional Notes

The light is in good working condition.

Equipment Pad


Filter Condition: Fair Condition $510

Filter #1 Filter #2
Filter Brand Filter Model
Sta-Rite S7M120
Filter Notes
Filter Additional Notes

Fair Physical Condition, Poor Element Condition (High Filter Pressure - Low Water Qaulity - Filter Internal Replacement $355-475). Also the filter tank o ring and pressure gauge need service / replacement ($155).

Filter Pump Condition: Poor Working Condition$

Filter Pump #1 Filter Pump #2
Filter Pump Brand Filter Pump Model Horsepower
Sta-Rite Dyna Glas 1.25HP - 1,50HP
Filter Pump Condition
The bonding wire is connected and secure
Filter Pump Notes
Filter Pump Additional Notes

The filter pump is in working condition however it is currently high in pressure and heat most likely due to a dirty filter / filter elements. Approx life remaining if left in current condition ; 1 - 48 months. If the filter is serviced expect this pump heat to decline, If it doesn't expect motor replacement is needed soon.

Note to replace the motor of the filter pump approx cost $555. To replace with a variable speed $1675 installed.

Filter Pump Additional Repairs
None

Booster Pump Condition: Poor (Recommend Hose Replacement / Connection Fittings) $210$210

Booster Pump #1 Booster Pump #2
Booster Pump Brand Booster Pump Model Horsepower
Polaris PB4-60 1.00HP - 1.25HP
Booster Pump Additional Notes

The pump will need service to bring back to water proof. Approx cost to service ($105-210).

Note the booster is in VERY HOT condition, this is most likely caused due to a starved pump of water supply needed to operate correctly. This is caused by dirty filter elements or an under powered pump. Recommend filter service and re checking pumps heat level.

If this pump were to fail, replacement with a valve vs the pump would be better for energy efficiency.

Spa Jet Pump Condition: Poor$910

Spa Jet Pump #1 Spa Jet Pump #2
Spa Jet Brand Spa Jet Model Horsepower
Sta-Rite Dyna Glas 2.00HP - 2.50HP
Spa Jet Additional Notes

The spa jet pump has leaks present in the seal plate, and the pump lid o ring, recommend service to resolve ($355). Note however this pump is VERY HOT, which is caused by unresolved poor bearings. This motor should be replaced soon ($555+).


Waterfall Pump Condition: Poor$255

Waterfall Pump #1 Waterfall Pump #2
Waterfall Pump Brand Waterfall Pump Model Horsepower
Sta-Rite Dyna Glas 1.25HP - 1.50HP
Waterfall Pump Additional Notes

The waterfall pump is in poor working condition. No issues other than being VERY HOT. Recommend replacement pump lid o ring, basket, and service ($255). Otherwise I would expect this pump to last another 1 - 48 months before motor replacement is needed ($555+).

Auxiliary Pump A Condition: N/A$

Auxiliary Pump A #1 Auxiliary Pump A #2
Auxiliary Pump A Brand Auxiliary Pump A Model Horsepower
Auxiliary Pump A Additional Notes

Auxiliary Pump B Condition: N/A $

Auxiliary B #1 Auxiliary B #2
Auxiliary Pump B Brand Auxiliary Pump B Model Horsepower
Auxiliary Pump B Additional Notes

Heater Condition: Damaged (Needs Attention) $555

Heater #1 Heater #2
Heater Model Heater Brand
Sta-Rite Max E Therm
Heater Additional Notes

The heater is in working condition, however the heater membrane and possible control panel are in desperate need of service ($555) recommend repair.

Equipment Control System


Board & Timer Condition: Fair - Damaged - NON GFCI / NON BONDED$255

Board/Timer #1 Board/Timer #2
GFCI Compliant
GFI/GFCI/Light Breaker/Plug is not connected to any light, recommend service to repair and upgrade this issue for safety ($245)
Board & Timer Additional Notes

The equipment panel smells of overheated electronic material. This may be caused by a low supply of electricity under high demand due to improper wire size / breakers size / all of the above. Recommend hiring an electrician to verify power supply is ideal before low supply caused equipment short outs at that time upgrade the breakers and light breaker to GFCI compliance for safety, currently it is not ($245).

Auxiliary Timer Condition: N/A $

Auxiliary Timer #1 Auxiliary Timer #2
Auxiliary Timer Additional Notes

Salt Control Systems Condition: Damaged (Needs Attention)$1255

Salt Control #1 Salt Control #2
Salt System Power Detect Salt Flow Detect Salt Presence Low Salt
Yes No No Yes
Salt Control System Additional Notes

The salt control system is failing / failed. I would not recommend replacing the salt cell ($755) or the controller ($500). Recommend instead of installing a UV / O Zone System. This will resolve sanitation issues compared to salt.

Valves & Fittings Condition: Damaged (Needs Attention)$1340

Overall Details

Recommend installing a UV protection barrier and painting with UV protectant paint ($255).

Additionally the equipment pad needs service on most connections due to salt conditions ($555) this includes unions / o rings.


Due for maintenance, large equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment.
No, the equipment pad is not UV protected by a UV protectant paint, recommend painting this pad to ensure long PVC piping life as well as certain equipment
Condition
Damaged (Needs Attention)
Notes

One of the two actuators are no longer working. Approx cost to repair / replace ($355).

Condition
Damaged (Needs Attention)
Notes

Recommend service as described above.

Recommend installing a bonding wire to the light junction box as well as the equipment panel for safety ($175) .

Condition
Good
Notes

The indoor control panel is in good working condition.

Condition
N/A
Notes
Condition
N/A
Notes

Estimated pool repair costs based on typical seasonal construction pricing.(seasonal pricing changes $7178Est. Totals


Edit
 

Comments are closed.



Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can
take care of it!

Pool Questions ? Call Us!

Do you need some swimming pool assistance? Maybe just a few questions answered ? Well give us a call, we are only a phone call away.

Sometimes you just need a second, qualified opinion.

Office: (916) 467-8038

Mobile: (916) 905-5818

Sacramento Pool Inspections & Service

We provide Weekly Pool & Spa Service, Pool Inspections, Pool Repairs, & Pool Tile Cleaning around the Sacramento Area, CA and the surrounding communities.

Swimming Pool Inspections & Service | (916) 905-5818