The safety fencing is all up and in working condition, however some points of entry are not self latching. Recommend modifying all access points to the pool to self close and self latch.

Some missing surfaces, were sealed with concrete vs plaster. Not ideal, but it appears to be working at this time as the issue appears to be resolved as the water chemistry is showing signs of older water (older than 3 years+). I would not expect the plaster blemishes to need to be addressed before the next re plaster in 3 - 12+ years however if they do need attention expect the cost to be approx $100-500.

Note the spa spillover has some sections of missing plaster / gunite and could be fixed by laying down a fresh coat of surface over the top of it ($100-500) to resolve any water loss potential.

Further note in the spa there is one jet air relief / air induction line that has a heavy water seepage section, and one that has a light leak section. Both will need some attention either during re plaster or now to add waterproofing sealant ($255+).

If desired, calcium removal from pool tile and rock work. Approx cost is $600-850.

There are sections of missing surface / tile sections that can be repaired for approx $100-500 detailed in surface.

Otherwise the tile surface is damaged but fair / good.

The water quality is in good condition overall, however there is algae present, and the water Islas high cyanuric acid levels, and lower than normal calcium hardness levels (indicating a small recent leak) .

Two skimmers not in working condition ; needs proper skimmer basket size, weir door, floats, float o ring(s), approx cost $255 per skimmer

The main drain cover(s) in the spa are not in working condition / due to age should be replaced ($88 x 2) as well as any equalizer lines x 2.

The bottom cleaner is in fair condition, recommend ; tail, tail sponge, hose swivels x 3, approx cost $105+

The fill valve is leaking during use, recommend service ($125)

The pool light is working, now issues at this time, recommend cleaning behind both lights due to water quality and algae present ($55 x 2) otherwise no issues.

The spa light does power on, however it is very dim, and is showing signs of safety issue, recommend replacement light ($475+).

The filter pressure is high! And most likely due to algae presence. The filter needs service; o ring , pressure gauge, filters ($105) and the elements will need to be changed after the algae is removed ($355). Otherwise this filter shell should last another 1 - 4 years without issue.

The filter pump is in working condition with no issues present.

This heater hasn't worked in more than a decade. Approx cost to replace ($1575 for a standard heater , $2875 for a large heater).

The board and timer are no longer being used as the filter pump has a built in timer.

Therefore this breaker box should be removed / sealed ($255-455).

The light GFI is not ideal and should be updated for safety to GFC ($245).