Solid, good surface, older than 7 years. Salt pool at one time did minor etching to plaster and surrounding concrete. Regardless plaster remains ideal. Recommend maintaining balanced to ensure 7-15+ additional years.

Very little calcium build up present. Recommend nothing at this time. No loose or missing tiles.

Light algae in shade, recommend phosphate treatment and balance of chemicals then filter cleaning to help eliminate algae in shady areas, may take one or two treatments ($130 x 2).

Two main Drain covers in deep end of pool in fair condition. Due to age covers need Replacment with VGBA covers x 2 ($38x2).

The skimmer is in ideal working condition of used / fair condition parts; weir, basket, missing float ($55) all items should be replaced in the next 1 - 10 years ($105).

The bottom cleaner unit is running and working well, into Replacment parts needed to bring back to ideal ; bottom unit mount plate , tail, tail sponge. Approx cost ($105).

No issues at this time, auto fill shut off is located on the equipment pad.

In the next 10 years expect to replace this float head with the new plastic standard ($10) ideally before failing point (non stop running).

The pool light is not on a GFCI circuit and should be upgraded for safety as this is the modern standard ($55-255).

System 3 ; Cartridge 400sqft in fair condition. Element may need Replacment soon, recommend filter cleaning ($85) to identify Replacment need ($355) however very likely due to physical condition.

De w/push pull valve;leaking from filter internal Union o ring set ($105) and push pull valve re plumb ($305) both can be repaired in under 8 hours.

Due to the age of this particular pump, I would classify this as a soon to expire situation ($555-755) and therefore the pump could be replaced with a variable speed pump to ensure low energy costs and efficient operation of this swimming pool as a one pump pool (best option here). Otherwise this pump will function for another 1 - 24 months without issue.

When the booster fails in 1 - 48 months, remove this pump and instead install a valve to bypass this pump ($655) and install a return bottom cleaner for $450 (Polaris 360). Otherwise this soon to fail pump is in working condition and will operate most likely for another 1 - 48 months without issue.

This Sta Rite Max e Pro Pump is in fair condition with little issues present: dirty /older pump lid o ring, recommend service and or replacement lid o ring ($55-105) , and the motor should last another 12 - 48 months before a motor replacement ($200) and installation ($355) may be needed.

The Polaris Sol System is a fine working system , but now 15-20 years later a newer standard has been introduced, so there is that option and several others.

For now this wireless controller controls all functions of the pool and adds programming to the system for automated functions , if standing near the panel as wireless connectivity is not the best.

Otherwise to quickly select equipment to turn on recommend using the outdoor panel for immediate response and preferred for all uses of the pool (minus programming).

This outside panel shows a temp sensor error ($157) however due to age I wouldn’t recommend Replacment of that issue item instead replacement of this entire control system ($1500-2800) to allow full automation from your mobile phone anywhere in the world.

The light gfi here present is also much older and should be upgraded for safety on either the light Breaker or the plug gfci ($155+).

Otherwise no issues present to prevent this system from operating at this time.

The pad overall is in fair to good working condition.

Needs include;

1. UV shade cover
2. Debris removal around equipment
3. Re paint equipment pad
4. Re paint some equipment to ensure longevity
5. Some valves need to be re tuned / lubricated / and or removed and replaced with a 10 yr standard fitting vs a 1 - 3 yr present
6. Re position some equipment / remove some equipment / install some valve bypass options

All items above would cost approx $1575 to bring back to ideal new standard including parts and installation.