There are 5 repaired structural cracks that have been repaired and in turn re sealed. Water test shows "no water loss at this time" and I feel it will stay this way for at least 7 years. One or two additional areas of attention are the rust spot on the east wall and the tile loss found on that same wall.

The mastic has already been repaired or attempted to be repaired approximately 2 to 10 years ago and may need to be redone in the next 2 to 10 years ($250+). Some sections it's missing (clear silicone added) and while it's mostly visual and not an actual water stop missing sections are not detrimental overall vs sub soil conditions prepped before construction. Overall mostly a visual repair.

There are some areas of missing / loose tile. Approx cost to repair items found ($100+). Note additional tiles may be loose and will need to be re done in the next 1-10 years ($250+) recommend further investigation by a tile technician to determine if a mortor service is also needed between tiles (most likely).

Light calcium build up can be removed for ($450) in the next 1 - 10 years.

The water quality is not terrible but it's not ideal due to high chlorine and high cyanuric acid. Both can be lowered via a half drain ($255). Also due to light algae build up add phosphate treatments ($85). Note water loss not found due to high cyanuric and calcium hardness levels.

The skimmer is in working condition however it is missing / or needing several items due to condition and age , recommend Replacment float , weir, & float o ring ($105).

Overall this skimmer is very difficult to get to and use, recommend adding steps behind the north waterfall vs requiring someone to shimmy to access the skimmer and skillfully lift the skimmer basket out with marionette strings attached. Overall not ideal, but that’s why they blocked this skimmer from receiving debris (not ideal), recommend modification of some kind.

There are four main drain covers, they all should be replaced due to age ($25 x 4)

This bottom cleaner despite its physical appearance / condition is in great mechanical condition and should last another 2-10 years without issue. Note someone put the tail in the wrong position otherwise ideal.

The float head needs one small part added to it to allow proper function ($10). A hose from the out of the auto fill (finger pointing) to the can to not water the wall and drop water behind concrete during use.

New filter elements, recommend filter service to replace pressure gauge and pressure assembly ($55) in 1 - 10 years. The filter tank o ring is leaking and should be replaced asap ($105).

The filter pump is in working condition, however the motor is in poor condition and will fail in the next 1 - 24 months ($555 to replace motor , $775 to replace pump , $1325-1675 to replace with ultra energy efficient variable speed pump installed).

There is a leak located on the return fitting and will need to be repaired asap($145).

The pump is in working condition, no issues at this time.

In the next 1 - 10 years consider removing this booster pump and installing a return modification valve to allow the bottom cleaner to run without this energy consuming pump ($605).

The timer board is in fair to poor working condition, both timers should be replaced soon with digital timers (like left timer) as they expire every 4 - 10 years, and these timers appear to be less than that however due to current condition (possible rain damage) recommend modification soon (1-24 months) ($175).

The breakers installed are all non GFCI standard, newest, and should be upgraded for safety ($255+)

Otherwise no fault issues at this time.

Current light GFI plug is not GFCI compliant breaker.

The o zone system is not working at this time (no led indicator) and can be sent in for service ($255-405+) to allow this unit to work again if desired.

This is controller , not a salt controller, this is the controller inside the home/wireless controller it is in working condition and functions all main functions of the swimming pool.

All valving needs to be repaired / replaced in the next 1 - 10 years ($205-305) .

Currently the calving needs to be opened cleaned, and lubricated, and re sealed for proper operation ($155) and painted with UV paint as well ($105).