There is black algae growth on the plaster surface. Recommend drain and acid wash , however due to age of pool / cost recommend water treatment ($180) vs drain and treat ($250-$350+).

There is heavy algae buildup throughout this pool surface, increasing chlorine, adjusting chemicals to proper levels, and doing enzyme and phosphate treatments along with filter cleanings will help reduce or eliminate algae ($355) but again a pool drain ($250+) will allow this 3-7 yr old water to be purged and new water added fresh (void of organics).

Both skimmers need their interanals replaced due to age ($155) otherwise in working condition.

The main drain is non VGBA complaint cover ($88-$275).

Newer unit, in good working condition. Some parts should be replaced for standard maintenance (tail, sponge, etc $105)

otherwise in the next 1 - 10 years removing this unit and installing a Polaris 360 to work off the main filter pump only VS this unit off a second pump will allow energy efficient bottom cleaning ($850 includes unit and valving modification).

N/A

Not only will the pool light need to be fixed an electrician ($155+) will need to add a few pieces of equipment ($100-400) to bring this light back up to code and safe and ideal.

****At that time, you can save future electrician service charges and do two tasks at once By installing a wireless controller (Pentair Easy Touch w/ Intellicom for the pool ($900-1700) to allow automation that is controlled via your phone as well).

Due to black algae, this filter is in Poor Condition. High Filter Pressure - Low Water Qaulity - Internal Replacment $340. At that time recommend filter pressure gauge Replacment and tank o ring ($105).

The conduit is broken and exposing the wire and the binding wire is not secure ($125) recommend repair.

The filter pump is in distressed condition due to the dirty filter elements creating extremes in resistence. Recommend cleaning / replacing elements to relieve this pumps issue.

Currently, the pool pump has significant air or is struggling to prime in its pump basket. The motor is failing making loud noise, the shaft o-ring or seal plate o-ring has failed or will leak soon due to the additional heat, and / has a hot motor.

Recommend filter service ASAP. Also note this pump is Oversized for the application (1-1/12” plumbing) max HP should be 1/2 however since the de filter requires a minimum flow rate to backwash this may be impossible achieve with a 1/2 HP. Therefore a sand filter swap out ($775-1375 Pentair Sd-80 - tr-100) would be ideal here along with a variable speed SuperfloVs or Intelipro pump ($1300-1600 installed prices).

This booster is newer however starving for water due to low flow from filter which is harming the pump. Recommend turning this pump off until filter is cleaned.

GFI/GFCI/Light Breaker/Plug is not connected to any light, recommend service to repair and upgrade this issue for safety ($245) this is outlined in pool light section.

The two timers are in poor condition. The right timer or bottom Cleaner timer is not working ($155).

Overall all fittings and connections should be re done (except the newer push pull valve) or painted in the next 1-24 months ($205) vs re doing this pad to ideal standard ($775).