Small water like crack on south top wall , water loss not present. Recommend filling crack for longevity ($250-500) with expoxy (low cost, clear epoxy, 1-10 years life) or plaster (long term 10+ years, non color match). Otherwise this plaster surface is in excellent condition compared to the chemical abuse in the skimmers (most likely from 3” tablets being left in skimmer).

No tile installed. Instead plaster and natural stone installed. This compromises the plaster surface / due to expansion and contraction of the plaster when submerged during winter or empty during summer. In any case expect this “concept” to last another 2-12 years before re tile may be required ($3-6k) as this current “concept” is not ideal and already showing issue (detailed under surface).

Both skimmers need their skimmer floats, float o ring, and weirs replaced ($205) as they’re older and no longer functioning ideally. Same as the main drain covers x 5 ($88ea) as they’re all older than 7 years and should be repacked.

The unit is towards the end of its life cycle and will expire as is in less than 3 years. At that time Replacment would be recommended due to the chemical burns on the unit (will also be found on the internal components). A new unit is $450. Repairs to this unit (approx ($100-205) to bring to near new condition.

Recommend auto fill float Replacment.

The filter drain plug o ring is leaking and should be serviced for repairs ($105) as well as a filter cleaning ($65) and possible element Replacment if needed determined at cleaning ($255-305).

The motor is a level 2 out of 4 of heat, indicating the motor is in a stressed state and in need of repair or adjustment (Filter cleaning should resolve any issue).

The motor is hot (3 out of 4) indicating a stressed state. If left un modified this pump motor will last another 1-36 months before replacment is necessary ($405-755). Note however with a valve modification this pump can be bypassed for the main filter pump for peak energy efficiency ($505 to add this feature).

Fair to Pool condition as the motor is hot (3 out of 4) indicating a stressed state. If left un modified this pump motor will last another 1-36 months before replacment is necessary ($405-755). Note however with a valve modification this pump can be bypassed for the main filter pump for peak energy efficiency ($505 to add this feature).

Fair to Pool condition as the motor is hot (3 out of 4) indicating a stressed state. If left un modified this pump motor will last another 1-36 months before replacment is necessary ($405-755). Note however with a valve modification this pump can be bypassed for the main filter pump for peak energy efficiency ($505 to add this feature).

The heater is in working condition with no major issues present. Note heaters last between 10 and 20 years this heater appears to be 12 years old and since it’s a Hayward I would not expect it to last longer than three to seven additional years Before Replacment may be needed ($1500-2800 installed).

The board is in working condition (Jandy i9 board with indoor panel (12-15 yrs old) . The heater has been disabled to run during booster operation (ideal).

No - Older GFI standard, tests, and resets the pool and or spa light. Recommend upgrading to GFCI standard for safety ($125)

Due for maintenance, medium equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment ($455), add another ($850) to add automatic waterfall function and removing the two pumps (waterfall / spa jet pump).