 |
Condition
Damaged (Needs Attention) |
Notes This check valve should be in working condition, however during time out duration this valve did not stop the flow of water, and allowed all water to drain from system, recommend installing a "non low cost" "high flow" check valve ($155-255).
|
 |
Condition
Poor |
Notes There are two valves installed limiting about 90% of the water flow to the waterfalls from the waterfall pump, recommend adding a bypass to bypass extra flow to pool ($455).
|
 |
Condition
Poor |
Notes This check valve should be in working condition, however during time out duration this valve did not stop the flow of water, and allowed all water to drain from system, recommend installing a "non low cost" "high flow" check valve ($155-255).
|
 |
Condition
Poor |
Notes This salt cell is in great physical condition, however it wont be such for long if left in direct sunlight, recommend covering for added protection ($55).
|
 |
Condition
Poor |
Notes Breaker mat not be the appropriate size due to breaker trip when salt control is activited;
panel 1-5 amp
salt 5-10 amp
booster 12 amp
filter pump 25 amp
pool lights 2-5 amps x 3
waterfall pump 10-20 amps)
Peak amps; 87
Current Breaker appears to be 100 amps, however house access panel may not supply this amount of needed electricity, recommend identifying issue with main panel showing more than 200AMPS service to home (as pool equipment should be 100, air conditioner 50, therefore only leaving rest of home 50 amps... recommend electrician service if needed; ($255)
and is most likely causing additional issues.
|
Edit