The surface has two patches, and several wear marks (10-30% of surface) throughout. I would expect another 3 - 12 years before additional issues may be found. The abrasive surface will cause more organic growth to occur.

The first skimmer is in *working* condition however it is missing its *float valve* ($50) and float valve o-ring ($65). Recommend minor repair.

The main drain is not VGBA compliant and should be upgraded for safety ($88).

The unit is in ideal working condition, however some small parts are needed; tail sponge, tail, tires soon ($105).

The pool light is in fair condition, the light appears to have build up on the outside of it , also the inside of the light can should be cleaned ($55). Otherwise this light should last another 1 - 10 years.

Due to condition of Filter Physical Condition (poor), recommend filter cleaning $55, to determine longevity of filter internals.

The filter is leaking , from the lower portion of the filter, and should be checked further, most likely the lower half o ring sections will be needed ($155-405).

This filter is in fair to poor condition and will need to be replaced in 1 - 5 years, recommend a sand filter $875.

The filter pump is in fair to poor condition, and will need to be replaced in 1 - 5 years ($775-1675).

As of now the pump lid o ring, basket, and shaft seal appear to be leaking, recommend service ($305).

This pump is in poor condition (~$475) , and the hose connections are leaking now and will need service asap ($210) , recommend replacement / and or valve modification vs these other repairs; (~$650). Otherwise once repaired this pump will last another 1 - 24 months before replacement will be required.

The timer controller is in working condition.

The GFI breaker /+ plug is in poor condition and not safety compliant, recommend upgrade ($155-255)

No, the equipment pad is not UV protected by a UV protectant paint, recommend painting this pad to ensure long PVC piping life as well as certain equipment ($175).

Due for maintenance, small equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment ($455).