The surface appears to be in fair to good condition, with approx 5 - 12 years of life left, however, because what was found in the bottom cleaner it appears it is closer to 12-48.

Plaster is coming off in bottom cleaner bag, recommend re plaster soon 12-48 months ($5500-7500).

The first skimmer is in *working* condition however it is missing its *float valve* ($50), The first skimmer is in *working* condition however it is missing its skimmer *float valve o-ring* ($65).

The pool main drain cover appears newer than 7 years, and VGBA compliant.

***The spa main drain cover appears newer as well and the 2 foot of spacing is in question of VGBA compliance*** confirm with last plastering / construction company.

The bottom cleaner is in working condition, however the unit needs minor repair parts (tail, sponge, bag ($105) soon. Otherwise this unit is in ideal condition.

I was not able to find an auto fill for the pool, instead I found one for both fountains, which both are not working correctly (missing feed tubes) and floats are older metal version in need of plastic replacement ($125+)

One of the two lights is not working, and in need of replacement ($620) before swimming should occur. Also note the light GFCI breaker should have tripped (variable light voltage) and showing signs of issue therefore an electrician should re examine this issue and determine if the proper amp rating is present ($155).

No issues present.

Unit is in ideal physical condition, with a leaking tank o ring, recommend tank o ring service ($55) or replacement ($105), and cleaning the cartridges as well ($85).

Pump is working well, however the pump lid o ring, is in need of replacement / or service ($105) as it is leaking every start and stop, and some air.

Ideal Booster

This pump is in working condition. No issues found.

Air blower Pump - In Damaged Condition

The pump is leaking on the suction side fitting of the pump ($175), that has caused the motor to heat to higher than normal temperatures causing the motor to fail / bearing to fail ($255), recommend motor / pump replacement ($555 / 1375+) vs repair.

This pump is in working condition. No issues found.

The drain plug o ring also needs to be serviced ($155) as it is leaking now.

The board is working, and all items functioning on the timer board.

The light GFI is in question (under pool light section).

Salt Control Working, Salt On Site

Two actuators in working condition now, however they will fail in 1 - 48 months ($555).

Check valves x 3 are no longer working ($755) and should be replaced.

Ortega check valve replacement ($375) includes several plumbing pieces around it.

No, the equipment pad is not UV protected by a UV protectant paint, recommend painting this pad to ensure long PVC piping life as well as certain equipment ($175).

Due for maintenance, small equipment pad, Required every 10-15 years, all valving must be opened, cleaned, lubricated, and re sealed to ensure longevity of equipment ($455).