Pool fencing gate is locked leading to pool. Garage door was locked but opened for me for service.

The tile has calcium build up along the waterline, that can be removed with calcium cleaning glass bead blasting ($450).

Signs of Algae on the bottom cleaner wall adapter / inlet (othwerwise no other signs of algae), recommend filter cleaning, phosphate treatment, and chemical balance to effectively treat algae.

The skimmer we have a missing float valve ($55) we do not have a missing weir however it is older than five years therefore recommend replacement ($55) and recommend installing the float valve o ring ($65).

Bottom Cleaner is worn, recommend removal of booster and this bottom cleaner vs repair. Costs detailed in last section of report Valving Section.

Leaking older metal fill when in use. This device is used once weekly during summer for 20-45 minutes, recommend repair ($125).

It appears that there is water on the inside of both light fixtures. Recommend Replacment x 2.

Filter is in fair working condition. Signs of past leaks however no leaks currently. Low pressure is ideal. Replacement of cartridges required every 12-24 months ($150-350) or up to 5 years if well maintained. Confirm these cartridges are newer (less than 6 months old). Otherwise Replacement may be needed.

Filter pump is in working condition however the motor and pump body are damaged from long term abuse and will need to be replaced in 1 - 24 months ($300/555/798).

Variable Speed Energy efficient pumps range from 1200-1700. And cost $10-30/mo vs this pump at $55-125/mo.

Poor Condition Booster with a Hot Motor, replacement will be needed in 6 months - 5 years.

Timer is in working condition.

The gfci is like new.

The pool light(s) are on a dimmer timer and in working condition. Recommend checking this compatibility with an electrician to verify compliance to GFCI standards.

Also note **concern** is cast due to the fact both lights have condensation on the inside of both lights yet it is still being powered, indicating abnormal function of GFI/GFCI plug. And upon arrival the light breaker was turned to the OFF position and not TRIPPED.

The solar temp sensor is not functioning, therefore the automated temp selection is not working.

The actuator is 7-12 years old and in working condition. With so much UV I would expect this actuator ($355) to last another 1 - 48 months.

The solar three-way valve is leaking from its neck o ring , recommend service ($175).

The solar shut off valves x 2 need to be replaced in 1-36 months ($310) ($155 ea x 2) as one is broken and one will break soon.

The solar check valves also are not functional $350 ($175 x 1 or 2).

The water temp sensor may have failed / solar temp sensor (try water sensor first as it’s on the equipment pad vs the other one on the roof) ($155-375). Currently the solar function is not automatic (recommended) instead manual functioning only by switching actuator valve).

The booster pump hoses need to be re sealed at its hose to pvc connection ($175) but I recommend instead removing the booster pump and installing a 3 way valve to power a different style pool sweep ($1275 upgrade to eliminate pump need and $$$ on energy costs that are not needed).