The plaster is worn and in some areas may be close to gunite surface. Some small areas of staining due to chlorine tablet burns on plaster. Some low points in plaster found in 10% of surface.

Approx life left is 3 - 7/12 years if well maintained.

The concrete around the pool is older than 7-12 years and is failing as expected, due to materials used. Either replace / re do current stone, or remove and re do with turf or d.g.

Due to high calcium hardness it appears this water has been in this body of water for a long time approx 5 - 12 year old water.

The skimmer is in good working condition with no items missing.

The main drain covers appear to be VGBA compliant and more than 2 feet apart, however due to estimate age of the covers, replacement is recommend for covers ($88 x 2 ).

There are two bottom cleaners avil, one is a pressure style and one is a robot. The robot is in ideal condition and will work another 4 - 15 years without issue.

The filter is in fair condition, with filter elements that need to be cleaned asap ($85) and potentially replaced soon ($250-350) every 2 - 5 years.

The filter should have its o ring, filter pressure gauge, and union o rings serviced and o replaced ($155-250) in the next 1 - 24 months.

Ideal working condition.

This pump has failed and instead of repair or replacement ($455) I would recommend installing a valve and by passing this pump all together for energy efficiency ($555).

The heater does turn on , with gas supplied, however it does show a CE error and does not fire up at all. Recommend service ($155) to ident. issue.

The timer is in working condition. It is automated and can potentially have a module added for phone connection to allow remote control and programming.

The light gfci is not in working condition due to failed pool light. Recommend replacement GFCI breaker installed in both the plug and for the pool equipment (pentair variable speed breaker).

The salt cell is in like new (12-24 months) condition and can last another 5 years if well maintained.

This cell can only be tested at 58/68 degrees and higher, therefore easy removal of this cell is possible to bring to a pool store to test at a 3rd party independent body of water.

Salt Level was NOT tested. Due to low temperature.

The piping and the fittings are all in working condition. However due to the foundation of the pad shifting and the older sun exposed piping I would recommend re doing the piping and fittings and re pouring a new concrete pad and re installing the equipment ($1885) in the next 1 - 10 years.

Otherwise recommend booster removal due to leaks, and one o ring leak ($125 service call).