Must swing away from pool. And self close and self latch.

The plaster is in ideal condition. The shallow steps show signs of spider cracking from either low circulation time or it was dry for a brief period of time. This issue should resolve itself over time.

Little to no calcium build up. No missing tiles.

The chemistry is slightly off and should be corrected with minor chemical addition.

Recommend bottom cleaner fitting service ($105) to avoid this exact issue.

The light appears to be in fair working condition at this time , however because of the rust and water debris left on the inside of the light lens I assume this light was no longer water tight at one time and therefore no longer functions (which is why its ran directly for power vs going through a GFCI on the equipment pad) Therefore I feel this light is an electrocution hazard and should be replaced asap ($575) as well as the light breaker should be reconnected here ($155-305).

The filter elements inside should either be cleaned ($85) or replaced ($500) (if older than 5 years, which it most likely judging by filter pressure). Filter tank o ring is also leaking due to higher pressure due to dirty / failing filter element and therefore should be either cleaned ($45) or replaced and lubricated ($105).

There is water leaking from the seal plate o ring as well as the return connection. Additionally the motor is a level 4 out of 4 on heat, possibly a 5 out of 4, and there is no reason to believe that it hasnt been ran this way for months if not years. Recommend pump replacement ($775) , motor replacement ($555) , or variable speed low energy replacement ($1375).

This booster is a level 4 out of 4 on heat, likly due to the lowered water supply due to a dirty / replaceable filter blocking needed water supply. I feel once the filter element is cleaned or replaced that this issue will resolve itself.

Heater turns on and heats very well.

The timer here is in good working condition. The light switch under the booster timer , operated the booster pump as a main shut off. The timer on the right operates the main filter pump. Both appear to be in working condition at this time. The breaker GFI plug here is not connected to the pool light as it should, and is also loose and exposing its wiring to the elements. Recommend minor repair on this issue ($125 -175+) estimated value under pool light.

Valving in good working condition. Looks recently re done, and it was done well, no issues present.

Recommend UV shade protection.